Single-axis controller S11 The single-axis controller S11 is a hall sensor switching device designed for electrohydraulic and remote controlled hydraulic. The modular design of the switching device is universally applicable. The single-axis controller is resistant to oil, maritime conditions e.g. offshore /vessels, UV radiation typically from the sun. Technical data Mechanical life S11 6 million operating cycles Operating temperature Storage temperature Grip / palm grip Knob (standard) M Mechanical zero interlock Push button Spring return (included in basic unit!) Friction brake Interface (description on the following page) E0xx Digital output Voltage output Current output Standard plug connectors (see page 129) Special / customer specified Identification of the installation variants with switching directions: S11 2 Technical details may vary based on configuration or application! Technical data subject to change without notice!

Single-axis controller S11 Digital Output Supply voltage Current carrying capacity Direction signal 150mA Zero position signal 500mA Cable 500mm long without plug connector Optional with plug connector (standard plug connectors see page 129) Cable 500mm long with plug (male) 1 axis Voltage output (not stabilized) Supply voltage Current carrying capacity Cable 500mm long without plug connector Optional with plug connector (standard plug connectors see page 129) 0,5...2,5...4,5V redundant + 2 direction signals per axis 1 axis Output options Characteristic: Inverse dual Inverse dual with dead zone...

Industrial Controllers Current output Technical details may vary based on configuration or application! Technical data subject to change without notice!

Industrial Controllers T = Dead man's button Hole pattern Technical details may vary based on configuration or application! Technical data subject to change without notice!