STANDARD JOYSTICK MJ-4K The use of contactless Hall technology in this joystick is recommended, if only limited installation space is available or the application is subject to high vibration. The MJ-4K 2-axis joystick fullfils all these requirements. The trusted durability of the MJ-xx joystick series is also guaranteed with the MJ-4K as is the proven reliability. The applications are vast and range from rehabilitation equipment and automation technology to construction equipment and marine applications. ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Operational voltage Service life Output signal Deflection angle, mech. Operating force Gate shape Power consumption Centre position tolerance Impact strength ELECTRICAL CONNECTION Redundant output signal Electrostatic discharge Radio interference Storage temperature High-frequency interfering signals Operating temperature Conducted interfering signals Protection class (above mounting flange) Radiated emission FCI Minitek 98414 AMBIENT CONDITIONS Base Specifications are subject to change without notice. * Other values on request. Stainless steel/plastic MJ-4K Type Item number Type Item number MJ-4K XY: Hall 0.5 – 4,.5 V, open gaiter version for adapter assembly E060200408 (2-axis) MJ-4K XY: Hall 0.5 – 4.5 V, additional variant with closed rubber boot E060200570 (2-axis) MJ-4K XY: Hall 0.5 – 4.5 V redundant, additional variant with closed rubber boot Item number E060200580 (2-axis) Connection cable Connecting plug with lock

Connector: FCI-Berg Minitek 98414-F06-08U Connector: FCI-Berg Minitek 98414-F06-08U 56.3 (~ 57.0 assembled /compresses gaiter