The linear joystick of the MJ-1L type series is the robust light-weight of the MJ-xx joystick series. One of its feature characteristics is space-saving in the customer's housing. The installation space and extra functions, combined with a compact housing are excellent arguments to choose the MJ-1L. Less weight, easier controls of operations are huge advantages for end users. The robust design (also available with additional protective cover) guarantees a long service life. Ultra light • Minimal installation dimensions Robust design "Long service life Compact • Conductive plastic technology Aerial work platforms Radio remote controls ■ Forklift trucks ■ Mobile hydraulics Steering of boats Protective cover Resistance value 5 kohm ±20% (2x2.5 K ±20%) ELECTRICAL SPECIFICATIONS Linearity ± 2% Operating force 4N typically * Impact strength Max. 180 N AMBIENT CONDITIONS Max. contact current 1 mA in case of malfunction Contact current < 10 jUA Protection class IP CC Contact resistance (CRV) < 400 ohm (switch level) MATERIALS Base Plastics Dielectric strength 2000 V 10 - 90% (±1%) of VCC Output signal 0 - 100% (±1%) of VCC Bearing Plastics Electrical connection 7-pin Molex Neutral position ±2.5°(50% ±0.5% of VCC measured load-free) MECHANICAL SPECIFICATIONS Service life 5 million cycles BRS-0 Stepless brake, detent in the zero position Specifications are subject to change without notice. / * Other values on request.

10.3 Mounting: 2x screws for plastic K30x__ Z1 A2 (supplied) Drive mode: PH1/Z1 ~ 0.7Nm Plate thickness up to 3.50mm: K30x10 Z408000031 Plate thickness from 4.0 - 6.0mm: K30x12 Z408000018 Connector: Male header Molex 70553-0111 Connector latching: 7pol. Molex Cable 500mm ws/white LiYv 0,14mm2 VDE0812 [order separately: Z301000507) Potentiometer: Resistance value 2.5 kOhm ±20% Output signal reverse redundant 10 - 90% of supplied voltage Pin 1: Voltage supply Pin 2: Output voltage signal Pin 3: Output voltage signal Pin 4: Voltage supply Potentiometer: Resistance value 5 kOhm ±20% Output signal 10...