Catalogs >
U-CONTROL >
ANALOGUE 3-AXIS INDUSTRIAL JOYSTICK MJ-2K OM

ANALOGUE 3-AXIS INDUSTRIAL JOYSTICK MJ-2K OM
2Pages

Catalog excerpts

ANALOGUE 3-AXIS INDUSTRIAL JOYSTICK MJ-2K OM - 1

The 3-axis version of the MJ-2K series joystick with IP66 protection stands out through its high-precision zero return. A special lamellar gaiter seal provides the required operating reliability even in harsh environments. Analogue sensors enable high-precision control at low power consumption. Galvanized isolated directional contacts provide reliable operation on construction sites, in robotics, in mechanical and systems engineering, for construction equipment and even boats. •Long service life "Compact • Aerial work platforms "Forklift trucks • Robotics •Robust design "Conductive plastic technology • Radio remote controls "Hydraulics • Microscopy ELECTRICAL SPECIFICATIONS Deflection angle, mech. See drawingResistance value 5k Q * Operating force XY: 5 N typically Gate shape Square, soft cross guide Wiper zero position ± 1° Independent linearity ± 2% Impact strength XY: 150 N / Z: 1.5 Nm Zero position switch per axis XY: < ±3° open ; Z: < ±4° open User control Handle with Gaiter Mounting Outside mounting (OM) AMBIENT CONDITIONS Contact current Max. contact current < 10 jUA 1 mA in case of malfunction Storage temperature -40°C ... +85°C Operating temperature -25°C ... +70°C Insulation resistance 10 GQ at 500 VDC Protection class IP 66 Dielectric strength 2000 V MATERIALS MECHANICAL SPECIFICATIONS Base Aluminium Service life XY: 5 million cycles, Z: 3 million cycles Bearing Stainless steel/plastic Electrical connection 12-pin Hirose plug Specifications are subject to change without notice. * Other values on request. M2.5x16 with 3mm mounting plate, Mounting mounting ring. Select screw length to match plate thickness. MJ-2K CP (CONDUCTIVE PLASTIC) ANALOGUE OM

Open the catalog to page 1

ANALOGUE 3-AXIS INDUSTRIAL JOYSTICK MJ-2K OM - 2

Assembly of Gaiter together with Mounting Ring MJ-2K 4xM2,5/30x30 MLX-Art.-No.: Z404000023 If thickness of mounting panel is 3mm: Use Screw M2,5x16mm / Center Hole D=35.0 62.0/min. depth for mounting (cable Z-axis) Male Connector HIROSE No.: 543-0041-7-01 pitch: 2.0/12-pole (black) Basic Diagram and Pin allocation identical with X/Y Connect. Resistance 5 kOhm ±20% Analogue band 10% – 90% Utotal ±3% Medium Voltage 50% Utotal ±2,5% Linearity = ±2% Contact Res

Open the catalog to page 2