Catalogs >
Tyrolit - Schleifmittelwerke Swarovski AG & Co K.G >
Copia di 2016-I ceramics 8

Copia di 2016-I ceramics 8
3Pages

Catalog excerpts

Diamond Drills For The Automotive Industry TYROLIT provides a wide range of monobloc drills and drills with mobile countersinks for the Automotive Glass Industry. They are specially designed and manufactured to guarantee the best quality of the hole at high feed rates. Excellent start up: from the first hole you get an excellent edge quality. To speed up the start, TYROLIT provides the drills with properly dressed diamond surface. High feed speed: the diamond drills have been designed for a consistent performance throughout their lifetime: the high edge quality is guaranteed up to 120 mm/min working. Excellent edge finishing: the diamond drills allow you to achieve excellent quality standards, ensuring a perfect finish both on inside and countersunk parts. Long lifetime: the sintered diamond drills are manufactured using specific bonds to grant an excellent lifetime, that satisfy the highest standards in the market.

Open the catalog to page 1

Monobloc core drills CORE DRILLS Drills with mobile countersink Range of products Fittings available 1/2" gas, 0 9,5, 0 10, 0 12, 0 16 Total length (L) from 75 mm up to 95 mm_ Body_Stainless steel_ DRESSING Drill's diameter Recommended Drilling rate with Drilling rate with coolant Countersink STICKS FOR peripheral speed water speed

Open the catalog to page 2

Total length (L) from 75 mm up to 95 mm Fittings available Body COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 COUC FLH2 Total length (L) from 75 mm up to 95 mm CDAC FVDN CDAC FVDN CDAC FVDN CDAC FVDN CDAC FVDN CDAC FVDN CDAC FVDN CDAC FVDN CDAC FVDN Higher diameters on request Fittings available

Open the catalog to page 3