TYRI CONSTRUCTION
12Pages

CONSTRUCTION Lighting solutions for the construction sector.

Natural resources are not infinite. TYRI’s responsibility towards the environment drives us to build high quality products that continue to perform. In turn, this delivers better working conditions, less down-time, improved long term economy and a healthier environment.” - TYRI MANAGEMENT TEAM -

ARE ALL LED WORK LIGHTS BORN EQUAL? Choosing the correct light for your application can be confusing, so the choice is often decided by price. Unfortunately, not all LED work lights are the same. Low cost LED’s are frequently manufactured with low cost components and a lack of quality control. This could mean that the level of brightness, colour spectrum and expected lifespan may not meet your expectations for the application. TYRI manufactures work lights to the highest quality, so you have the utmost confidence that our lighting will stand up to punishing regimes. ELECTROMAGNETIC...

PRODUCTS FOR CONSTRUCTION For more information about our products visit tyrilights.com Read more on page 8-9

LIGHTING FOR CONSTRUCTION Lighting and lighting levels are very personal to individual operators. There are so many different opinions on how to light a work area effectively. However, there are recommended guidelines to follow; such as that the difference in light between the brightest spot and the area around it should be no more than 30%. These recommendations intend to guide operators to the best solution. The key to effective lighting is evenness. Nothing tires the eye more than glare and uneven lighting; this is something which is more noticeable as operators increase in age. The eye...

Constructive Warning Using the TYRI 1010, Komatsu provide an effective lighting solution which increases safety and operator vision. A selection of placements around the machine ensures an even spread of light and an effective working environment for the operator. TYRI’s VL4 RedLine is mounted on top of the machine or on the canopy. At night, these throw a clear red line to the side, front and back of the vehicle, marking out a solid danger zone around the sides of the machine. This box can be extended to match the size of the activity. © Tadano Demag GmbH Tadano Demag Starting work early...

DRILL RIGGING SOLUTIONS On the drill mast and cab of this Epiroc FlexiROC D65, TYRI 1010 LED work lights are mounted with the aim to illuminate the drilling hole. Since drill riggs create large amounts of dust and drill carriages move downward, INTELLilight would also be a perfect alternative since colour temperatures can be changed and the lights can be dimmed without giving a negative impact on EMC.

THE GAME CHANGER At TYRI, we’ve always been keen to understand our clients’ working environments. That’s how we continue to create innovative solutions that improve the operators’ working conditions. INTELLilight is our new and revolutionary way to connect light sources in a wireless network mesh. Allowing the operator to adjust colour temperature, actively dim and group/regroup all connected lamps. Designed and engineered for a better working environment. More facts about INTELLilight. INDIVIDUALISED PROFILE Operating in snow, fog or dust greatly reduces your line of sight. INTELLilight...

INTELLilight® - Try virtual demo Since the dawn of heavy equipment, getting the correct working light has always been a difficult task to solve. Sometimes it shines too bright. Sometimes it’s too dim. It can be too warm (yellow). Or too cold (blue). At times even blinding the operator, or the colleagues working around you. Not to mention the fact that our eyesight differs from person to person. Yet the answer has always been standard solutions for everyone with simple on/off switches. Until now. With the ability to change the colour temperatures of the light from 2 700 K to 6500 K and the...

Stimulating simulations Knowing how your lighting is going to perform is vital to a design. Lighting simulations can be made both for customized products as well as for standard products. TYRI uses customer specific 3D data to create a simulation that helps to determine the positioning of the work light, how the light will fall, highlights any shadows and creates a unified field of lighting. TYRI produces these simulations in-house, using specialist software, giving customers a unique insight of how the light will perform on the machine. Your design partner TYRI understands that as an OEM...

LIGHTING KNOW-HOW A well-lit environment makes us feel safe and allows us to work easier. In a well-lit environment we can focus on the things we want to do instead of being disturbed by uncomfortable lighting, glare and hazy colour rendering. Per-Arne Torstensson, Optical Engineer at TYRI, provides some tips on factors that produce good lighting. UNIFORM ILLUMINATION A SUITABLE COLOUR TEMPERATURE The human eye is always drawn to bright areas, and when the light is uneven it can be distracting when your gaze and focus are constantly drawn to the brightest area. We want to avoid so-called...

TYRI locations SWED E N TYRI AMERICAS Engine Shed Lane Skipton, North Yorkshire TYRI ILUMINAÇÃO For all contact information, visit