COMMERCIAL VEHICLES (TRUCK & TRAILER) & TRANSPORT SOLUTIONS
12Pages

COMMERCIAL VEHICLES (TRUCK & TRAILER) & TRANSPORT SOLUTIONS Lighting solutions for commercial vehicles

Natural resources are not infinite. TYRI’s responsibility towards the environment drives us to build high quality products that continue to perform. In turn, this delivers better working conditions, less down-time, improved long term economy and a healthier environment.” - TYRI MANAGEMENT TEAM -

ARE ALL LED WORK LIGHTS BORN EQUAL? Choosing the correct light for your application can be confusing, so the choice is often decided by price. Unfortunately, not all LED work lights are the same; low cost LED’s are frequently manufactured with low cost components and a lack of quality control. This could mean that the level of brightness, colour spectrum and expected lifespan may not meet your expectations for the application. TYRI manufactures work lights to the highest quality, so you have the utmost confidence that our lighting will stand up to punishing regimes. ELECTROMAGNETIC...

PRODUCTS FOR COMMERCIAL VEHICLES For more information about our products visit tyrilights.com Read more on page 8-9

TERBERG BENSCHOP HL Compact and Turn Signal When Terberg Benschop, based in the Netherlands, wanted to offer an LED alternative headlight to meet customer demands, they began to look at possible suppliers. The new headlight needed to have the same look and feel of their current applications to allow retro fitting into the existing mounting points and be offered as an upgrade from Halogen to LED. They also required a LED turn signal to match the LED headlight. This also had to be designed in the current format; a yellow lens turn signal to fit on the current mounting points and be separate...

Clear Vision LED reverse lights are generally mounted very close to the ground and must stand rock chips, water, snow and mud. Therefore LED reverse lights should be of good quality so that they last for a very long time. Also in this case TYRI’s LED 0909 reverse lights (R10 / R23) are used to give the driver full vision behind the vehicle. Reverse lights are also available in models 1010 (R10/R23) and VL4 (R148) Extend the life of your work lights Take good care of your LED reverse lights! It is essential that the lenses of your lights are cleaned on a regular basis. If this is not done,...

Improved visibility Improve your driver’s working condition and ensure 100 % visibility when reversing. TYRI LED 1010 to the left and LED 0909 to the right are two product families consisting of both LED work lights and E-rated LED reverse lights, with different lumen output and voltage ranges. Other brackets than standard brackets are available for both lights. Effective Lighting Driving long timber trucks, especially in poor weather conditions at all times of the day is a challenge for each driver. During winter months, snow covered ground creates intense glare with the average reflection...

THE GAME CHANGER At TYRI, we’ve always been keen to understand our clients’ working environments. That’s how we continue to create innovative solutions that improve the operators’ working conditions. INTELLilight is our new and revolutionary way to connect light sources in a wireless network mesh. Allowing the operator to adjust colour temperature, actively dim and group/regroup all connected lamps. Designed and engineered for a better working environment. More facts about INTELLilight. INDIVIDUALISED PROFILE Operating in snow, fog or dust greatly reduces your line of sight. INTELLilight...

INTELLilight® - Try virtual demo Since the dawn of heavy equipment, getting the correct working light has always been a difficult task to solve. Sometimes it shines too bright. Sometimes it’s too dim. It can be too warm (yellow). Or too cold (blue). At times even blinding the operator, or the colleagues working around you. Not to mention the fact that our eyesight differs from person to person. Yet the answer has always been standard solutions for everyone with simple on/off switches. Until now. With the ability to change the colour temperatures of the light from 2 700 K to 6 500 K and the...

Stimulating simulations Knowing how your lighting is going to perform is vital to a design. Lighting simulations can be made both for customized products as well as for standard products. TYRI uses customer specific 3D data to create a simulation that helps to determine the positioning of the work light, how the light will fall, highlights any shadows and creates a unified field of lighting. TYRI produces these simulations in-house, using specialist software, giving customers a unique insight of how the light will perform on the machine. Your design partner TYRI understands that as an OEM...

LIGHTING KNOW-HOW A well-lit environment makes us feel safe and allows us to work easier. In a well-lit environment we can focus on the things we want to do instead of being disturbed by uncomfortable lighting, glare and hazy colour rendering. Per-Arne Torstensson, Optical Engineer at TYRI, provides some tips on factors that produce good lighting. UNIFORM ILLUMINATION A SUITABLE COLOUR TEMPERATURE The human eye is always drawn to bright areas, and when the light is uneven it can be distracting when your gaze and focus are constantly drawn to the brightest area. We want to avoid so-called...

TYRI locations SWED E N TYRI AMERICAS Engine Shed Lane Skipton, North Yorkshire TYRI ILUMINAÇÃO For all contact information, visit