Rotary encoder TBE36
6Pages

{{requestButtons}}

Catalog excerpts

Rotary encoder TBE36 - 1

Electromagnetic absolute encoders Model series TBX 36 □ SINGLE-TURN TBX 11713 DE Electrical interfaces ■ Model TBE 36 ■ Model TBI 36 ■ Model TBN 36 ■ Model TBA 36 Synchronous-serial SSI (Page 2) Incremental (Page 3) CANopen (Page 4) Analogue (Page 5) ■ Compact and robust design for machines and systems, especially for construction machines, underwater devices and food processing machines ■ Digital or analogue interfaces ■ High vibration and shock resistance thanks to robust mechanical design and additional casting within the housing ■ Housing: aluminium or stainless steel ■ Dual-chamber system for separating the rotor and electronics ■ Resolution: 4096 steps / 360°, (12-bit binary) (13-bit optional) ■ Protection types: IP66 (IP 69K optional) ■ Operating temperature range: -40 °C to +85 °C Design Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm) - stainless steel shaft and ball bearing - ball bearing with Simmer ring, rotor with shaft and permanent magnet mounted in pre-chamber - sensor circuit consisting of ASIC with Hall elements and interface electronics in enclosed main chamber - housing protection type IP 69K additionally cast - electrical connection via cable (open cable ends). ■ Sensor system: ASIC with Hall elements ■ Meas. step deviation: ± 0.5 LSB Environmental data for all models ■ Operating speed: ■ Angular acceleration: ■ Moment of inertia (rotor): ■ Operating torque: ■ Starting torque: ■ Perm. shaft load: ■ Bearing service life: ■ Mass: 1000 rpm max. (optionally up to 10,000 rpm) 105 rad/s2 max. 20 gcm2 < 8 Ncm (at 500 rpm) < 4 Ncm 100 N axial 100 N radial > 109 revolutions Approx. 0.150 kg ■ Operating temp. range: ■ Storage temp. range: ■ Resistance: □ To shock: DIN EN 60068-2-27 □ To vibration: DIN EN 60068-2-6 ■ Protection types (DIN EN 60529): IP 66 IP 69K on housing side (optional) Dimensions, materials and accessories: Page 6 ■ Connection assignments are supplied with the absolute encoders. TWK-ELEKTRONIK GmbH ■ PB. 10 50 63 ■ D-40041 Dusseldorf ■ Tel.: +49/211/63 20 67 ■ Fax: +49/211/63 77 05 ■ info@tw

Open the catalog to page 1
Rotary encoder TBE36 - 2

Electromagnetic absolute encoders TBE 36 Electromagnetic absolute encoders TBE 36 Model TBE 36: Synchronous-serial interface -12-bit / 360 idle state idle state DATA OUT + + 11 VDC to + 26 VDC 50 mA typ. / 80 mA max. 4096 steps / 360°< - (12 Bit) (8192 steps / 360°<, optional) Binary CW (CCW optional) Differential data output (RS 422) Differential data input (RS 422) 16 ±10 ps (standard) Max. 1 MHz Function The absolute angle information present in the absolute encoder is serially and synchronously transmitted to the receiver electronics within one cycle. The essential advantages of this...

Open the catalog to page 2
Rotary encoder TBE36 - 3

Model TBI 36: Incremental outputs Electrical data ■ No. of pulses (standard): 1024 pulses/revolution ■ Outputs: Channels A, B and zero plus the inverted signals ■ Signal form: Square pulses ■ Signal form: Square pulses Model series: TBI with incremental output The basic versions according to the data sheet bear the number 01. Deviations are identified with a variant number and are documented in the factory.

Open the catalog to page 3
Rotary encoder TBE36 - 4

xzriza Electromagnetic absolute encoders TBN 36 xzriza Electromagnetic absolute encoders TBN 36 Model TBN 36: CANopen interface - 12 bit / 360° Electrical data According to CANopen Application Layer and Communication Profile, CiA Draft Standard 301, Version 4.1 and according to "Device Profile for Encoders CiA Draft Standard Proposal 406, Version 3.0" and CANopen Layer setting Services and Protocol (LSS), CiA DSP 305. ■ Operating voltage range: ■ Operating current: ■ Resolution: ■ Output code: ■ Code path: ■ Reference value: ■ CAN-interface: ■ Address setting: ■ Terminating resistor: ■...

Open the catalog to page 4
Rotary encoder TBE36 - 5

Electromagnetic absolute encodersTBA 36 Model TBA 36: Outputs 0-20 mA, 4-20 mA, 0-10 VDC or ±10 VDC In order to record mechanical variables such as angles, rotary movements or positions, the contactless electromagnetic sensor system is extended with a 12-bit (360° measuring angle) D/A converter so that the measured variable is available as an analogue signal from 0 (4) to 20 mA, 0 to 10 V or ± 10 VDC. - As standard, the encoders are designed for a measuring angle of 360°. At the request of the customer, other measuring angles can also be set with the specified output signals in the factory....

Open the catalog to page 5
Rotary encoder TBE36 - 6

Electromagnetic absolute encoders TBX 36 Radial shaft seal Materials used Aluminium housing: Stainless steel housing: Stainless steel shaft: Housing cover: Threaded cable connection: Simmer ring: Sealing rings: AlMgSi1 1.4305 1.4305 Nickel-plated PA/Ms Nickel-plated PA/Ms NBR NBR BSeries KL 66-2 securing clamps 51+ 0,5 mm Nickel-plated brass Required screws: ( units each required) 4 countersunk head with hexagon socket DIN 7991 Pitch diameter:

Open the catalog to page 6

All TWK-ELEKTRONIK GmbH catalogs and technical brochures