Catalogs >
TWK-ELEKTRONIK GmbH >
Rotary encoder TBA42

Rotary encoder TBA42
16Pages

Catalog excerpts

Data sheet No.: TBA/TRA 14269 DE Date: 18.04.2019 ■ Robust design for harsh applications e. g. cranes and construction machinery ■ Magnetic Sensor system(s) ■ Measuring ranges TBA: 360° (4096 revolutions x 360°) ■ Mrotection grade IP 65/ IP67 (IP 69K option) ■ MRA Option: Redundant design (Data sheet - TRA 12665) Design - Robust housing (Wall thickness max. 5 mm) manufactured from seawater-proof aluminium (AlMgSi1 -3.2315) or stainless steel (Material: 1.4305 or 1.4404). - Shaft fitted with ball bearings bears the magnet for recording the angular position and the drive gear of the multiturn transmission for absolute revolution counting - Design form in 0 42, 0 50, 0 58 mm diameter and customer specific applications - Magnetic sensor system(s) for position measurement - Signal output via 12-Bit D/A converter Analogue Signal outputs: 0 (4) to 20 mA, 0 to 10 VDC or ± 10 VDC available. - Electrical connection via connector M12x1 or via cable Function The rotary encoder has an analogue interface. The D/A converter has a resolution of 12 bits, which are distributed over the maximum measuring range of 360° (TBA) or 360° x 4096 revolutions (TRA). The sensor TBA has a measuring range of 360 degrees, that means one turn. The encoder TRA provides additionally the revolutions (max. 4096) absolute with a gear. The standard values are 360° at TBA and 1,474,560° (360° x 4096 revolutions) at TRA. The output signal can be parameterised and referenced via Teach-in by means of two multifunction pins (MFP). For both sensors TBA and TRA the Teach-in functionality is integrated. Via the Teach-in functions following parameters can be changed: Set zero point, set final value, set Preset value (middle of the measuring range), code sense (CW or CCW) and also the setting of the default values. With the functions set zero point and set final value the gradient of the signal output can be changed. TWK-ELEKTRONIK GmbH BismarckstraBe 108 info@twk.de visit us at | twk.de

Open the catalog to page 1

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue outputTechnical Data Electrical Data ■ Sensor system(s): ■ Supply voltage range: ■ Power consumption: ■ Measuring range: ■ D/A-Converter: ■ Code sense: ■ Accuracy TBA: ■ Accuracy TRA: ■ Repeatability: ■ Temperature drift: Magnetic Sensor system(s) 0 58: 9 to 36 VDC (Output: A, B, C) ± 13 to ± 16 VDC (Output: D) 0 42, 0 50: 18 to 28 VDC (Output: A, B, C) ± 13 to ± 16 VDC (Output: D) protected against polarity reversal, short-circuit proof TBA: < 1 W TRA: < 1,5 W TBA: 360° TRA: 1,474,560° (4096 revolutions x...

Open the catalog to page 2

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue outputPrinciple diagramsPrinciple diagrams TBA and TRA (Model 0 58) Model: TBA Model: TRA magnet singleturn N S position controller Standard TRA measuring range The encoder TRA has a maximal measuring range of 1,474,560° (360°x 4096 revolutions).The standard setting is 3,600° (10 revolutions are the default value). With the Teach-in functionality (see MFPs) the encoder canbeprogammed customer specific e.g. to 4,096 revolutions or other values. Deviating measuring ranges from the standard can be made in our...

Open the catalog to page 3

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue outputAdjustment via Multi-functional pins Adjustment via Multi-functional pins The customer specific parameter zero point, end value, preset value, code sense which depends on the application and the default values can be set via both Multi-functional pins 'MFP0' and 'MFP1'. The input circuit is E1 (see page 6). The logical level are '0' : 0 VDC or '1' : 24 VDC. With the functions set zero point and set the end value the gradient of the signal output can be changed. * Other values on request To make...

Open the catalog to page 4

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue output Input circuit E1, Timing diagrams and Output circuits Input circuit for input E1 (MFP-Multi functional Pins) active "high" Timing diagrams for the MFP settings 1. et MFP 0 or MFP 1 once S Set zero point (MFP 0) Set end value (MFP 1) Time difference between MFP 0 and MFP 1 ≤ 0.25 s. 2. et MFP 0 and/or MFP 1 twice with the S same shaft position Set preset value (2 x MFP 0) Change the signal path (MFP 0 - MFP 1) Logical 1 Without position change Output circuit Output B

Open the catalog to page 5

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue output Electrical connection, Mating connectors, Contact arrangements Electrical connection  TBA Ø 58: M12x1, Pin, 8-pole, A-coded or radial cable, 8-wire M12x1, Pin, 8-pole, A-coded or radial cable, 8-wire  The connection diagram is an integral part of the delivery and is enclosed with every device. Mating connectors (must be ordered separately) Order code number Type Pole number socket, A-coded socket, A-coded socket, A-coded Connector design Housing material brass nickel-plated brass nickel-plated...

Open the catalog to page 6

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue output Connection diagrams Connection diagram for signal outputs A, B, C Date: 18.04.2019 Page 7 of 16 Document No. TRA 14269 DE

Open the catalog to page 7

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue outputOrder code number TRA 58 - K A 3600 W S B 01 Electrical and 01 mechanical variants* Output signals: A 0 - 20 mA B 4 - 20 mA C 0 - 10VDC D ±10 VDC Electrical connections: K1 Cable length 1 m S Device connector M12 Code sense: W CW1 C CCW*** Measuring range1: 360 Measuring range = 360° - TBA - standard 3600 Measuring range = 3600° - TRA - standard Housing material: A Aluminium 3.2315 S Stainless steel 1.4305 V Stainless steel 1.4404 Flanschart: 58 K Clamped flange, shaft 0 10 mm with flat KF Clamped...

Open the catalog to page 8

Absolute electro magnetic encoder Series TBA / TRA Singleturn / Multiturn Analogue outputAssignment table for flange, sealing of bearings, rpm and protection grade Assignment table for flange, sealing of bearings, rpm and protection grade (design 0 58) Date: 18.04.2019 Page 9 of 16 Document No. TRA 14269 DE

Open the catalog to page 9

Rotary encoder TBA42 16Pages

Catalog excerpts

All TWK-ELEKTRONIK GmbH catalogs and technical brochures

Rotary encoder TBA42
16Pages