Catalogs >
TWK-ELEKTRONIK GmbH >
Rotary encoder HBE

Rotary encoder HBE
14Pages

Catalog excerpts

High resolution absolute single-turn rotary encoder Model HBE  Robust design for rough applications with high resolution requirement such as crane technology, construction machines and special engineering  High vibration and shock resistance thanks to the compact mechanical design  Resolution < 22 bit/360°  Protection type IP 66 - Robust housing (wall thickness 5 mm) manufactured from seawater-proof aluminium (AlMgSi1) or stainless steel (material: 1.4305 optionally 1.4404) - stainless steel shaft and ball bearing - magnetic based sensor system. The absolute angle information derived by the encoder is converted into serial information by an internal parallel-serial converter and then transmitted to a receiving electronic circuit in synchronism with a clock. - Supply voltage with transient filtering, output driver unit forms the electrical interface SSI. Important advantages are : Low number of data lines and high reliability. - Electrical connection via M12X1 connector, pin, 8-pin, A-coded An exhaustive description is contained in TWK's SSI 10630 pamphlet. TWK-ELEKTRONIK GmbH Heinrichstrasse 85

Open the catalog to page 1

TWTC ELEKTRONIK High resolution absolute single-turn rotary encoder Model HBE ' Electrical data ■ Operating voltage: ■ Power consumption: ■ Resolution: ■ Code path: ■ Reference value: ■ Accuracy: ■ Reproducibility: ■ Temperature drift: ■ SSI- interface: ■ Serial output SSI: ■ Clock input SSI: ■ Monoflop time: ■ Clock rate: ■ Connecting cable: 9 to 36 VDC (protected against polarity reversal) < 1.8 W 16 bit (for higher resolution, plase contact our technical staff) CW1 or CCW2 can be set 0 to (total number of steps -1) < ± 0.05 % (with reference to 360°) < ± 0.01 % (with reference to 360°) <...

Open the catalog to page 2

TWTC ELEKTRONIK High resolution absolute single-turn rotary encoder Model HBE ' Environmental data ■ Operating temperature range: ■ Storage temperature range: ■ Resistance □ To shock: □ To vibration: ■ EMC standards: ■ Protection type (DIN EN 60529): - 40 °C to + 85 °C - 40 °C to + 100 °C (without packaging) 250 m/s2; 6 ms DIN EN 60068-2-27 200 m/s2;10 Hz ... 2000 Hz DIN EN 60068-2-6 DIN EN 61 000 - 6 - 2 Immission (burst/ESD/etc.) DIN EN 61 000 - 6 - 4 Emission IP 66 (For higher protection types up to IP 69K, please contact our technical staff) data + data -- Vs (0 V) code sense set input...

Open the catalog to page 3

TWTC ELEKTRONIK High resolution absolute single-turn rotary encoder Model HBE ' idle state DATA OUT + Input circuit for setting the reference value and for setting of the Code sense CW/CCW of the encoder. Input E1 aktive "high" Date: 13.01.2016 Page 4 of 14 Document no. HBE 13321 EE

Open the catalog to page 4

Electrical connection ■ Connector M12x1, pin, 8-pin, A-coded ■ Refer to the tables below for the connection assignments; these are also enclosed with the devices. Mating connectors (to be ordered separately) All of the mating connectors listed in the following table are M12X1, 8-pin, A-coded, with screw clamp connection, with protection type IP 67, with screening on the housing and the maximum connection cross-section is 0.5 mm2. Date: 13.01.2016 Page 5 of 14 Document no. HBE 13321 EE

Open the catalog to page 5

High resolution absolute single-turn rotary encoder Model HBE Order number HBE Electrical and mechanical variants* 01 Standard Output: E SSI Electrical connection: S M12 connector (bus in/bus out) Kx Cable, x=length in m Output code R Binary code Resolution: steps / 360° 1 to 4,063,232 Housing material: A Aluminium S Stainless steel Flange type: 58 K Clamped flange, shaft 10 mm with flattened area KF Clamped flange, shaft 10 mm with woodruff key KP Clamped flange, shaft 10 mm with feather key KZ Clamped flange, shaft for measurement gear ZRS S Synchro flange, shaft 6 mm ST Synchro flange,...

Open the catalog to page 6

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Standard design form: clamped flange and shaft ø 10 mm with glattened area Order number: HBE58 - KA 65536 R S E01 (see drawing) Dimensions in mm Sensor connector M12 8pin pins, A-coded aligned Blanking plug Coding journal

Open the catalog to page 7

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: clamped flange, shaft 10 mm with woodruff key Order number: HBE58 - KFA 65,536 R S E01 NILOS ring Sensor connector M12 8-pole pins, A-coded aligned Blanking plug Groove for woodruff key DIN 6888-3x5

Open the catalog to page 8

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: clamped flange, shaft 10 mm with feather key Order number: HBE58 - KPA 65,536 R S E01 NILOS ring Sensor connector M12 8-pole pins, A-coded aligned Blanking plug 3 N9

Open the catalog to page 9

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: clamped flange, shaft for play compensating toothed gear ZRS (toothed gear, see accessories) NILOS ring Sensor connector M12 8-pole pins, A-coded aligned Blanking plug Coding pin

Open the catalog to page 10

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: synchro flange, shaft 6 mm with flattened area Order number: HBE58 - STA 65,536 R S E01 NILOS ring Sensor connector M12 8-pole pins, A-coded aligned Blanking plug Coding pin

Open the catalog to page 11

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: synchro flange, clamped shaft for 12 mm (torque support, see accessories) Order number: HBE58 - SRA 65,536 R S E01 Clamping shaft Di = 12 H7 Insertion depth: 16 mm NILOS ring Sensor connector M12 8-pole pins, A-coded aligned Blanking plug Coding pin Clamping ring (Aluminium)

Open the catalog to page 12

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: synchro flange, clamped shaft for 12 mm with groove for feather key (torque support, see accessories) Clamping shaft Di = 12 H7 Inserting depth: 16 mm Sensor connector M12 8-pole pins, A-coded aligned NILOS ring Clamping ring (Aluminium) Blanking plug

Open the catalog to page 13

High resolution absolute single-turn rotary encoder Model HBE Installation drawing Further possible design form: synchro flange, shaft 12 mm Order number: HBE65 - SA 65,536 R S E01 Sensor connector M12 8pole pin, A-coded, aligned Blind plug Coding pin

Open the catalog to page 14

Rotary encoder HBE 14Pages

Catalog excerpts

All TWK-ELEKTRONIK GmbH catalogs and technical brochures

Rotary encoder HBE
14Pages