RH 11393 IE 07 / 2015 ■ Conductive plastic potentiometers ■ Robust mechanical layout for industrial applications ■ Linearity ± 0,05% ■ Life expectancy up to 100 million cycles ■ Infinite resolution ■ With axial connector M12, radial or axial cable exits at option Construction Rectangular case in anodised aluminium - Shaft in stainless steel - Shaft entry either with floating guidence against dust (AF) or with lip seal (AG) to protection grade IP 65 - Conductive plastic resistance elements - Precious metal wipers - Axial connector or axial or radial cable exit - Ball joints at shaft end and / or case on request. Mechanical data ■ Operating speed: ■ Operating force: □ Variant AF □ Variant AG ■ Protection grade: Oder code format RH33 / 100-AG-KV-CD-A01 Electrical and / or mechanical variants Electrical connections CD = straight plug CC = angular plug AK3 = axial cable (3 m) RK2 = radial cable (2 m) Components KV = Ball joint on shaft KH = Ball joint on case, needs radial cable exit RK Electrical data ■ Linearty: ■ Resistance tolerance: ■ Consumption at 40°C: ■ Consumption at 100°C: ■ Max. wiper current : ■ Recommended wiper current: ■ Supply voltage.: ■ Insulation resistance: ■ Temperature coefficient of out put voltage: ■ Repeatability: Guidence of shaft AF = standard (IP60) AG = seal (IP65) Measuring strokes (example: 100 mm) * The basic versions in accordance with the data sheet bear the code number 01. Variations of the basic version are indicated by a consecutive number and are documented in our works. straight, plastic (STBG) straight, metal (STBGM) angled,plastic (STBW) straight, plastic, 10 m cable (STK65) Environmental data ■ Operating temperature range: ■ Storage temperature: ■ Resistance to vibration: ■ Resistance to shock: Supply and signal conditionning By ACTIPOT models as per data sheet 10346. Electrical connections TWK-ELEKTRONIK GmbH ■ PB. 10 50 63 ■ D-40041 Dusseldorf ■ Tel.: +49/211/63 20 67 ■ Fax: +49/211/63 77 05 ■ [email protected] ■

Dimensions in mm case lenght see table below dD -Spring washer Fixing nut 26 Version RH 33 with cable output Measuring strokes The measuring strokes are situated in the center of the mechanical strokes.