Specifications:
The AM 232 Twin Disc Pump Drive features a cast iron housing, case-hardened and ground spur gears, ball bearings, case-hardened shafts, and Viton seals on the input shaft. The output rotation is opposite to the direction of input rotation, and gear ratios are identical on all outputs. The modular design allows for flexibility in application.

Technical Data:
The maximum input power is 565 kW (758 HP) for a ratio of 1.00:1 at 2400 RPM. The document provides detailed specifications for various gear ratios, including maximum input torque, output torque per pump pad, input speed, output speed, and oil quantity.

Dimensions and Weight:
The basic pump drive weighs 126 kg (278 lb). Two additional pump pads are available on the input side of the drive.

Selection Procedures:
1. Identify the number and type of hydraulic pumps.
2. Check the maximum torque absorbed by the pumps.
3. Verify the maximum power/torque entering the pump drive.
4. Ensure proper clearance for pump mounting.
5. Select the desired input configuration (B, BD, BDS) and verify speed and torque limits.
6. Confirm output torque values are within limits.
7. Ensure input speed does not exceed maximum limits.
8. Select the proper output option for pump adaptation.
9. Identify cooling requirements, ensuring oil temperatures do not exceed specified limits.

Clutch Options:
The document details various clutch types and their specifications, including maximum input torque, speed, and power. Clutch engagements should occur with the prime mover below 1000 RPM, and high inertia loads may require larger clutches.

Safety and Compliance:
Users are reminded to operate the products safely in compliance with engineering information provided. Proper installation, operation, and routine maintenance are essential for safe operation. Users are responsible for providing and installing necessary safety devices as per recognized standards.