Specifications:
The AM 230 Twin Disc Pump Drive features a cast iron housing, case-hardened and ground spur gears, ball bearings, case-hardened shafts, and Viton seals on the input shaft. The output rotation is opposite to the input rotation, and gear ratios are identical on all outputs. The modular design allows for flexibility in application.

Technical Data:
The maximum input power is 430 kW (577 HP) for a ratio of 1.00:1 at 2600 RPM. Various gear ratios are available, each with specific maximum input torque, output torque per pump pad, input speed, output speed, and oil quantity requirements.

Dimensions:
The basic pump drive weighs 94 kg (207 lb) with specific dimensions provided for installation.

Selection Procedures:
1. Identify the number and type of hydraulic pumps.
2. Check maximum torque absorbed by the pump(s).
3. Verify maximum power/torque entering the pump drive.
4. Ensure proper clearance for pump installation.
5. Select input configuration (Basic, Engine mounted clutch, or Independently mounted clutch) and verify speed and torque limits.
6. Confirm output torque is within limits.
7. Ensure input speed does not exceed maximum.
8. Select appropriate output option for pump adaptation.
9. Identify cooling requirements, ensuring oil temperature does not exceed specified limits.

Clutch Options:
Various clutch types are available, each with specific maximum input torque, speed, and power ratings. Clutch engagements should occur with the prime mover below 1000 RPM, and high inertia loads may require larger clutches.

Safety and Compliance:
Users are reminded to operate products in compliance with engineering information and ensure proper installation, operation, and maintenance. It is the user's responsibility to provide necessary safety devices as required by safety standards or regulations.