Catalog excerpts
Achieving Optimum Balance for Maximum Value L & C S E R I E S P U M P S L & C Series Pumps’ SIMPLE, COMPACT DESIGN offers high efficiency and longer life. THE PUMPING PRINCIPLE Tuthill L & C Series cast iron pumps employ the internal gear pumping principle. There are only two moving parts. Pumping action is based on a rotor, idler gear and a cover cast with a crescent-shaped partition. As the pump starts, the teeth come out of mesh, increasing the volume. This creates a partial vacuum, drawing the liquid into the pump through the suction port. The liquid fills the spaces between the idler and rotor teeth and is carried past the crescent partition through the pressure side of the pump. When the teeth mesh on the pressure side, the liquid is forced from the spaces and out through the discharge port. UNIQUE REVERSING FEATURE This Tuthill innovation allows positive reversing action without the use of valves. Port positions remain constant regardless of the direction of shaft rotation. It is ideal for use in power transmission applications where the drive shaft direction changes, but the direction of flow must remain constant. Other applications where shaft rotation is unknown, the reversing feature allows the customer to specify the suction and discharge ports. When shaft rotation changes from clockwise to counter-clockwise, the idler carrier (including the idler gear and crescent) automatically rotates 180º through the suction zone to the position shown in the drawing above. This changes the direction of the flow within the pump without changing port positions. On resumption of clockwise rotation, the crescent will swing back to the original position. www.tuthillpump.com This design allows the pump to handle a wide range of viscosities while sustaining a constant flow regardless of pressure. The non-pulsating flow also runs substantially quieter than other pump designs. With minimal to moderate wear, our internal gear pumps outperform other pumping technologies. To find an authorized distributor, visit www.tuthillpump.com/distributors Tuthill Pump Group 12500 South Pulaski Road Alsip, Illinois 60803 USA phone: 708-389-2500 / fax: 708-388-0869 email: tuthillpump@tuthill.com Tuthill Pump Group 5143 Port Chicago Highway Concord, California 94520 USA phone: 925-676-8000 / fax: 925-676-8151 email: concord@tuthill.com Tuthill Pump Group Birkdale Close Manners Industrial Estate Ilkeston, Derbyshire DE7 8YA England phone: 44.115.932.5226 / fax: 44.115.932.4816 email: tuthillpumpuk@tuthill.com Tuthill Latin America 1320 South Dixie Highway, Suite 761 Coral Gables, Florida 33146 USA phone: 305-740-3381 / fax: 305-740-9328 email: tuthill.latinamerica@tuthill.com Tuthill Europe Parc industriel Wavre Nord Avenue Vésale, 30 - 1300 Wavre - Belgium phone: 32 10 22 83 34 / fax: 32 10 22 83 38 email: tld@tuthill.com Lubr and Stan over ication Circulation dard for 75 years Tuthill Australia 19/21 Milton park, 128 Canterbury Road Box 71, Kilsyth, Victoria, 3137 phone: 61 3 9720 6533 / fax: 61 3 9720 6880 email: asiapacific@tuthill.com.au Tuthill China Room 1507, Harbour Ring Plaza No. 18 Xizang Zhong Road Shanghai, 200001, P.R. China phone: 0086 21 53853369 email: china@tuthill.com.cn Engineered Solutions Engineered Solutions TUT04706 4/05
Open the catalog to page 1The L & C Series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. They were originally designed under James B. Tuthill, the company’s founder, in the 1920s. For eight decades, Tuthill has worked to improve these pumps to fit an ever-growing range of lubrication applications. The result is a family of reliable internal gear pumps that are ideal for custom OEM lubricating, lowpressure hydraulic, transfer, L & C S ERIES P UMPS L S E R I E S L U B R I C A T I O N • • • • • • L & C SERIES PUMPS – C S E R I E S C I R C U L A T...
Open the catalog to page 2The L & C Series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. They were originally designed under James B. Tuthill, the company’s founder, in the 1920s. For eight decades, Tuthill has worked to improve these pumps to fit an ever-growing range of lubrication applications. The result is a family of reliable internal gear pumps that are ideal for custom OEM lubricating, lowpressure hydraulic, transfer, L & C S ERIES P UMPS L S E R I E S L U B R I C A T I O N • • • • • • L & C SERIES PUMPS – C S E R I E S C I R C U L A T...
Open the catalog to page 3The L & C Series cast iron positive displacement pumps have been the industry standard for Lubrication & Circulation for over 75 years. They were originally designed under James B. Tuthill, the company’s founder, in the 1920s. For eight decades, Tuthill has worked to improve these pumps to fit an ever-growing range of lubrication applications. The result is a family of reliable internal gear pumps that are ideal for custom OEM lubricating, lowpressure hydraulic, transfer, L & C S ERIES P UMPS L S E R I E S L U B R I C A T I O N • • • • • • L & C SERIES PUMPS – C S E R I E S C I R C U L A T...
Open the catalog to page 4Achieving Optimum Balance for Maximum Value L & C S E R I E S P U M P S L & C Series Pumps’ SIMPLE, COMPACT DESIGN offers high efficiency and longer life. THE PUMPING PRINCIPLE Tuthill L & C Series cast iron pumps employ the internal gear pumping principle. There are only two moving parts. Pumping action is based on a rotor, idler gear and a cover cast with a crescent-shaped partition. As the pump starts, the teeth come out of mesh, increasing the volume. This creates a partial vacuum, drawing the liquid into the pump through the suction port. The liquid fills the spaces between the idler...
Open the catalog to page 5Achieving Optimum Balance for Maximum Value L & C S E R I E S P U M P S L & C Series Pumps’ SIMPLE, COMPACT DESIGN offers high efficiency and longer life. THE PUMPING PRINCIPLE Tuthill L & C Series cast iron pumps employ the internal gear pumping principle. There are only two moving parts. Pumping action is based on a rotor, idler gear and a cover cast with a crescent-shaped partition. As the pump starts, the teeth come out of mesh, increasing the volume. This creates a partial vacuum, drawing the liquid into the pump through the suction port. The liquid fills the spaces between the idler...
Open the catalog to page 6All Tuthill catalogs and technical brochures
-
HD Series Pumps
39 Pages
-
4000 Series Pumps
18 Pages
-
1008 & 1010 Size Pumps
9 Pages
-
Product Line Brochure
6 Pages
-
GlobalGear® Series
6 Pages
-
Tuthill Plastic Group
6 Pages
-
D Series Pump
3 Pages
-
Performance Curves - 1000 Series
16 Pages
-
Engineering Data Pack - M Series
23 Pages
-
FR1118P10 In-line Meter
1 Pages
-
Tuthill Precision Meters
8 Pages
-
Presentation - Lube Systems
9 Pages
-
L & C SERIES
6 Pages
-
Heavy Duty Series
6 Pages
-
2016 D, T, & P SERIES
6 Pages
-
1000 SERIES
6 Pages
-
White Paper - Pulp & Paper
2 Pages
-
White Paper - Asphalt
3 Pages
-
TI850 TH-063
2 Pages
-
QX TH-094
2 Pages
-
PD Plus 9000 TH-052
2 Pages
-
PD Plus 7000 TH-051
2 Pages
-
PD Plus 5500 TH-050
2 Pages
-
PD Plus 3200 TH-048
2 Pages
-
PD Plus 1200 TH-047
2 Pages
-
MD Pneumatics blower
2 Pages
-
PneuPak TH-056
2 Pages
-
PneuMax II TH-055
2 Pages
-
Equalizer RM TH-045
2 Pages
-
Equalizer DF TH-046
2 Pages
-
Competitor SL TH-044
2 Pages
-
Competitor Plus TH-043
2 Pages
-
TuffSeall
2 Pages
-
M Series
2 Pages
-
HD Series
6 Pages
-
Full Line
6 Pages
-
Vacuum Pumps Brochure TH-004
8 Pages
-
atlantic fluidics
16 Pages
-
KDS Dry Screw Vacuum Pump
3 Pages
-
Vacuum Pump Selector Guide
6 Pages
-
KTLP/VFP Series
2 Pages
-
Kinney® KMBD Vacuum Boosters
2 Pages
-
Liquid Ring Vacuum Pumps
16 Pages
-
Rotary Piston Vacuum Pumps
18 Pages
-
Process Gear pumps
6 Pages
-
T950H Brochure
4 Pages
-
T650 Product Brochure
4 Pages
-
Qube Product Brochure
6 Pages
Archived catalogs
-
GlobalGear® Series
6 Pages
-
2015 D, T, & P Series
14 Pages
-
Series 1000
6 Pages
-
T850/T1050 Truck Blowers
4 Pages