Jet Heaters A Closed-Loop Efficient Heat Solution Temperatures up to 1400°F (760°C) The JET provides a compact and efficient heater solution for air temperatures up to 1400°F (760°C). Available in a 3.0kW or 8.0kW, 240V 1PH unit, the Jet offers two type “K” thermocouples with a convenient terminal block for easy wiring. To ensure safety, power and perfect control, connect with the optional Jet Control Panel. Each heater has a convenient method for mounting the housing and offers a ground stud located at the inlet of the heater. Product Specifications Maximum Inlet Air Pressure 60 PSI (4 BAR) Features and Benefits Compact and efficient Maximum Inlet Air Temperature 200°F (93°C) All-purpose Single Phase Heater Maximum Exit Air Temperature 1400°F (760°C) Minimum air flow for accurate control is 2 SCFM Built-in protection when used with SureHeat control panel Minimum Airflow (Recommended) 2 SCFM (57 SLPM) Exit Air Connection: 1” FNPT Temperatures are measured by 2 internal “K” thermal couple sensors locationed inside the SureHeat Jet housing Inlet Air Connection: 3/4” FNPT Use of other sensor types and/or locations can result in heater damage SureHeat® Jet Products Part Number Compatible Contollers Part Number Input Power Single Phase

Performance Curves Jet Maximum Performance 377 • Temperatures are measured by internal “K” T/C sensors located inside the Jet Housing • Use of other sensor types and/or locations can result in heater damage • Minimum airflow for accurate control is 2 SCFM • Maximum air temperature is 1400°F (760°C) • Operating above temperature voids the product warranty Power Terminals #10-32 Screws Power Wire Port 3/4" NPT Air Inlet Port 3/4" NPT Sensor Wire Port 3/8" NPT 3.73" (94.6mm) TUTCO Heating Solutions Group 500 Gould Drive Cookeville, TN 38506 www.tutco.com #sh-jetdata-2023 Dimensions / Installation...