Hot Air Tools
3Pages

Hot Air Tools General Description Hot Air Tools are multi-purpose electric heaters with a built-in thermocouple for precise temperature control. The compact size makes this product perfect for single phase OEM applications. Its 304 stainless steel body construction is slotted for flared accessories and is made to withstand pressures up to 60 psi (4 bar) and temperatures up to 1400°F ( 760°C ) Closed-Loop Connection Diagram Flare Accessory Part Number: F068472 * Built-In Thermocouple Temperature Controller Part Number: F076361 Minimizing Hot Air Tools Element Failures 1. Always ensure air is flowing before powering the heating element 2. Slowly regulate the ramp up time using the potentiometer to control the AC voltage 3. Use a temperature controller with 100ms cycle time

Dimensions / Installation Reference 0.88" (22.4mm) Hose Barb Hot Air Tools Part Number Hot Air Tools Accessories Part Number F068472 F066823 F076361 Description Flare Attachment Accessory Closed-Loop SCR Power Controller Digital Temperature Controller

Hot Air Tools Performance Curves Hot Air Tool Maximum Performance Airflow in SLPM Notes: • Temperatures are measured by internal ‘K’ T/C sensors. Use of other sensor types and / or locations can result in heater damage. • Minimum airflow for accurate control is 60 SCFH • Maximum air temperature is 1400°F (760°C) with supplied “K” T/C. Operating above this curve will void the product warranty.