High Temperature Threaded Inline Heater
1 / 2Pages

High-Temperature Threaded Inline Overview The HT-TIL (High-Temperature Threaded Inline) air heater for a variety of demanding applications, including fuel cell, R&D lab, automotive and aerospace testing. Capable of producing air/gas temperatures to 900°C (1652°F) versus the standard of 750°C. This HT-TIL is a unique heater for critical applications up to 100 psi (7 Bar). Style “A” - Part No. F076619 For Higher pressures and Higher inlet temperatures       Max Exit Temperature Max Inlet temperature Max Static Pressure Inlet Fitting Exit Fitting TC probe included Type Overall Length Inlet Connections Ground Stud Included Material Minimum air flow 1652°F (900°C) 1000°F (538°C) 100 PSI (7 Bar) 1.25” MNPT (Male) thread 1.25” MNPT (Male) thread Yes – Duplex “K” 1/8” Dia. 22” (559mm) 0.250” Nickel terminal posts with hardware Yes 316 Stainless Steel 3 SCFM (85 SLPM) Style “B” - Part No. F076525 For Lower pressures and Lower inlet temperatures         Max Exit Temperature Max Inlet temperature Max Static Pressure Inlet Fitting Exit Fitting TC probe included Overall Length Inlet Connections Ground Stud Included Material Minimum air flow 1652°F (900°C) 120°F (50°C) 45PSI (3 Bar) 1.25” FNPT (Female) thread 1.25” MNPT (Male) thread No – customer supplied 20”

Ordering Information Length Both styles for use with air or inert gases only Pressure drop avg. 1.6 PSI (45” water column) at 900°C & 10 SCFM Performance Chart 129 Portsmouth Avenue Exeter, NH 03833 USA Tel: 603-418-7662 Fax: 603-778-4554 Specifications subject to change without notice.