Back-flush filter (Turbo-Clean)
1Pages

Turbo-Clean T-TCL Equipment: - Processing capacity 120-480 LPM - Suitable for removal of carbide from grinding oil - Incl. tanks for contaminated oil and clean oil - Incl. supply pump - Incl. sludge processing with a centrifuge - Optional recooling unit - Optional magnetic pre-separation Description of operation: Contaminated oil from one or more grinding machines is directed into the Dirty oil tank of the plant. A pump delivers the contaminated oil through a reversible flow filtration unit. The purified oil is accumulated in a clean oil storage tank. One or more supply pumps then supply clean oil back to the machine tool. The filters are back-flushed according to the level of contamination of the cartridges - this process is triggered automatically. The back-flushing process is staggered, so that the supply to the connected machines does not need to be interrupted. The back-flushed fluid will be directed into the centrifuge, from which the oil returns to the system. Sludge processing: Unlike most of the reversible flow filters available on the market, Turbo reversible flow filtration systems are set up with a centrifuge to process sludge. The centrifuge separates the solids and removes them as a compact sludge with low residual moisture. The sludge removal process takes place either manually or fully automatically, and the oil returns to the system. Optional: recooling: The reversible flow filtration plant can be equipped with a cooling unit. This ensures that the oil is kept at a constant temperature, and the dimensional accuracy of the produced workpieces is dramatically improved as a result. Advantages in operation: - No need for additional filtration aids - Relatively dry sludge = disposal quantities and costs are minimised - Good to very good constant filtration quality in the range from 2 – 5 µm - No need to interrupt operation, back-flush process does not require compressed air - Very inexpensive filter cartridges, excellent value for money