TAC Toolholders for Super High Feed Turning Turning X
TAC Toolholders for Super High Feed Turning Turning X
- Double Clamping Mechanism: Ensures high rigidity by securing the insert firmly with a clamping screw and clamp.
- ML Type Chipbreaker: Offers low cutting forces and high impact resistance, enhancing performance.
- Unique Cutting Edge Geometry: Distributes cutting load over a wide area, contributing to increased productivity.
- Turning X toolholders demonstrate 8 times the productivity compared to conventional toolholders, with improved chip control due to thin and wide chips.
- T9025: Suitable for low to medium speed machining, excelling in chipping and impact resistance.
- T9015: Ideal for continuous cutting at medium to high speeds, offering wear and impact resistance.
- AH120: Recommended for stainless and mild steels, especially if chipping or breakage occurs.
- Using Turning X, the feed rate increased significantly without chatter, enhancing productivity in roughing.
- Compared to CNMG type inserts, cycle time reduced by 40% with equivalent or longer tool life.
- Details on applicable inserts, cutting speeds, and feed rates for various materials like mild steel, carbon steel, and stainless steel.
- Includes dimensions, applicable inserts, and clamping details for different toolholder models.
Catalog excerpts
Significant Reduction in Machining Time through Super High FeedCapability >
Open the catalog to page 1
Conventional toollholder p =2mm f =0.3mm/rev)Work material: Mild steel (JIS SS400)Turning X ( Vc =150m/min > p =2mm f =2.5mm/rev)Work material: Mild steel (JIS SS400) >
Open the catalog to page 2
Solid Square, 580 Horikawa-cho, Saiwai-ku, Kawasaki City, 212-8503 JapanPhone: +81-44-548-9500 Facsimile: +81-44-548-9540 > 2-7, Sugasawa-cho, Tsurumi-ku, Yokohama City, 230-0027 Japan Phone: +81-45-503-9040 Facsimile: +81-45-503-9042Sales of machining tools > 1226A Michael Drive, Wood Dale, IL.60191, U.S.A.Phone: +1-630-227-3700 Facsimile: +1-630-227-0690Sales of machining tools > C Los Arellano 113, Vista Alegre, Aguascalientes, AGS, Mexico 20290 Phone:+52-449-929-5410 Facsimile:+52-449-929-5411Sales of machining tools > Elisabeth-Selbert-Strasse 3, 40764 Langenfeld, Germany Phone: +49-2173-90420-0...
Open the catalog to page 4All TUNGALOY catalogs and technical brochures
General Catalogue 2013966 Pages
New Procucts 201324 Pages
TAC boring bar8 Pages
Archived catalogs
- Milling tool
- Drilling tool
- Milling tool with replaceable insert
- Storage cabinet
- Floor-mounted cabinet
- Clamping milling cutter
- Torque wrench
- Metal cabinet
- Grade
- Milling cutter with cylindrical shank
- End mill
- Face milling cutter
- Shell-end milling cutter
- Cast iron milling cutter
- Indexable insert milling cutter
- Cutting milling cutter
- Multi-purpose drilling tool
- Shoulder milling cutter
- Tungsten carbide drill bit
- Slot milling tool