Mechanical and Hydraulic Winch Specifications

The document provides detailed specifications for a winch system available in both mechanical and hydraulic drive configurations. The approximate weight is 215 lb for the mechanical version and 227 lb for the hydraulic version.

Line Pull and Cable Capacity

Cable and Torque Data

The cable diameter is specified as 0.4375 inches. The input torque values are given for static and dynamic conditions, with a maximum input torque of 1,618 lb-in (183 Nm) and a maximum input speed of 1,100 rpm (124 mpm). The maximum torque capacity is 800 lb-in.

Hydraulic Drive Performance

The hydraulic drive uses a 5.9 CID motor. Key hydraulic parameters include:

• Pressure: 1,600 psi (103 bar)
• Flow rate: 20 gpm (76 lpm)
• Input torque: 343 lb-in at 0.375 CID and 198 lb-in at 0.5 CID

Cable Size and Capacity

The cable size is specified as 4.00 BBI x 11.00 FL x 10.00 W, with corresponding capacities detailed in the table above.

Summary

This winch system offers a maximum pulling capacity of 10,000 lb with detailed mechanical and hydraulic performance data. The specifications include line pull, line speed, cable capacity, input torque, and hydraulic parameters, providing comprehensive information for operational and design considerations.