*mydirectindustry

Model 30P

Product catalog summary

Specifications:
The Model 30P winch has a capacity of 30,000 lbs. It is available in two motor options: Single Speed and 2-Speed. The weight of the winch is 690 lbs for the Single Speed and 700 lbs for the 2-Speed version.

Optional Features:
Two motor options are available: Single Speed and 2-Speed.

Usage Limitations:
Winches are not intended for lifting or moving persons. The last 5 wraps of cable must remain on the drum to assist the cable clamp in holding the load.

Performance:
Performance is based on 30 gallons per minute (gpm) at 2500 psi using a 0.625-inch wire rope.

Line Pull and Speed:

Single Speed: Line pull ranges from 30,000 lbs at 29 feet per minute (fpm) on the first layer to 16,414 lbs at 54 fpm on the sixth layer.
2-Speed: Low speed line pull ranges from 30,000 lbs at 29 fpm to 16,414 lbs at 54 fpm. High speed line pull ranges from 15,046 lbs at 59 fpm to 8,207 lbs at 108 fpm.

Drum Capacity:
The drum can accommodate up to 517 feet of 0.625-inch wire rope across six layers.

Contact Information:
Tulsa Winch Group, P.O. Box 1130, Jenks, OK 74037-1130. Phone: 918-298-8300, Fax: 918-298-8301, Website: www.team-twg.com

Catalog excerpts

Model 30P 30,000 lb. WEIGHT SINGLE SPEED: 690 lbs. 2-SPEED: 700 lbs. OPTIONAL FEATURES MOTOR OPTION #1 SINGLE SPEED Because of continued product improvement, we reserve the right to make changes without notice. Winches are not intended to be used for the lifting or moving of persons. The last 5 wraps cable must be left on the drum to assist the cable clamp in holding the load. MOTOR OPTION #2 2-SPEED Tulsa Winch Group is a worldwide provider of winch systems and electronic load information systems. P.O.Box 1130 Jenks, OK 74037-1130 Voice: 918-298-8300 Fax: 918-298-8301 www.team-twg.com

Open the catalog to page 1

Model 30P 30,000 lb. MOTOR OPTION #1 - SINGLE SPEED LINEPULL LINE SPEED LAYER (lbs) (fpm) 1 30,000 29 2 25,794 34 3 22,569 39 4 20,062 44 5 18,055 49 6 16,414 54 MOTOR OPTION #2 - 2-SPEED LINEPULL LINE SPEED (lbs) (fpm) LAYER LOW HIGH LOW HIGH 1 30,000 15,046 29 59 2 25,794 12,897 34 69 3 22,569 11,285 39 78 4 20,062 10,031 44 88 5 18,055 9,028 49 98 6 16,414 8,207 54 108 Performance is based on 30 gpm @ 2500 psi With .625” wire rope. Performance is based on 30 gpm @ 2500 psi With .625” wire rope. DRUM CAPACITY – FT. LAYER .625 WIRE ROPE 1 61 2 132 3 213 4 304 5 406 6 517 TYPICAL HYDRAULIC SYSTEM...

Open the catalog to page 2

All Tulsa Winch catalogs and technical brochures

Archived catalogs

Winch application manual
21 Pages