Specifications:
The Electric Linear Unit ELE 60 is designed with a maximum stroke of 200 mm and includes features such as a motor brake and end position cushioning. It offers an optional protection plate for enhanced durability.

Ordering Information:
An example order might be ELE 60 100 42 V DM SB T02, where:

• ELE 60: Type
• 100: Stroke
• 42 V: Nominal voltage
• DM: Standard three-phase motor
• SB: Optional protection plate
• T02: Sensing system

The Tünkers sensing systems offer options such as T00 (without sensing) and T02 (inductive sensor 24 V, 2 outputs without LED).

Standard and Special Strokes:
Standard strokes are available at 100 mm and 200 mm. Special strokes for ELE 60-100 (10-100 mm) and ELE 60-200 (110-200 mm) can be requested.

Weight and Load Capacity:
The unit weighs approximately 17 kg for a 100 mm stroke and 20 kg for a 200 mm stroke. It supports a maximum load of 30 kg and a maximum moment of 60 Nm, with engine power around 1750 N.

Motor Specifications:
The standard three-phase motor has a protection system rated at IP54, with nominal voltages of 42 V or 400 V and a rated output of 50 W. It requires a minimum rest period of 10 seconds.

Optional Features:
A servo motor with brake and drive for multiple positions is available as an option, along with a protection plate.

Construction Tolerances:
Tolerances for dowel holes are ± 0.02, and for threaded holes, ± 0.1.

Standard Features:
The unit comes with a three-phase motor with brake, end position cushioning on both sides, and sensing T02 for end positions. An optional protection plate can be added for additional protection.