TUWAGON MASTER

TUWAGON MASTER

Product catalog summary
Product Overview: The TUWAGON MASTER is a suction and delivery hose designed for oil and petrol with aromatic content up to 50%. It is compliant with EN 12115 standards and certified by BUREAU VERITAS for use in Atex areas (Ex-Zone).
Specifications:
  • Tube: Made of black, conductive NBR 1.
  • Reinforcement: Composed of synthetic plies and galvanized wire helices, with anti-static wire to discharge static electricity.
  • Cover: Wide corrugated, black, conductive CR with a cloth finish. It is resistant to abrasion, ageing, ozone, and oil.
  • Marking: Yellow tape with embossed marking according to EN 12115 standards.
Technical Characteristics:
  • Temperature Range: -30°C to +100°C (-22°F to +212°F). The operating temperature depends on the fluid conveyed and contact duration.
  • Electrical Properties: Type Ω/T as per EN 12115 (R<106 Ω, R<109 Ω through the hose wall).
  • Norms: EN12115 - TRbF 131/2.
Performance Data: The hose's performance data, including inside and outside diameter, vacuum, working pressure, burst pressure, approximate weight, and bending radius, are provided for various sizes at ambient temperature (20°C).
See more

Catalog excerpts

TUWAGON MASTER-1

TUWAGON MASTER Suction and delivery hose designed according to EN 12115 standards for oil and petrol, aromatic content up to 50%. Tested and certified hose by BUREAU VERITAS for use in Atex area (Ex-Zone). DESCRIPTION Tube NBR 1, black, conductive WIDE CORRUGATED, BLACK, CONDUCTIVE, CLOTH FINISH CR Reinforcement synthetic plies, galvanized wire helices, a/s wire to discharge static electricity GALVANIZED WIRE HELICES SYNTHETIC PLIES BLACK, CONDUCTIVE NITRILE 1 wide corrugated, CR, black, conductive, cloth finish. Abrasion, ageing, ozone and oil resistant Marking TECHNICAL CHARACTERISTICS yellow tape TUDERTECHNICA TUWAGON MASTER Temperature range : -30°C / +100°C ( -22°F / +212°F ) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose. Electrical properties : type Ω/T according to norm EN 12115 (R<106 Ω, R<109 Ω through the hose wall) Norm : EN12115 - TRbF 131/2 embossed according to norm EN 12115 TUDERTECHNICA NBR1 EN12115:2021 DN SD PN 10 BAR Ω/T Q/Y Inside diameter Outside diameter Working pressure Burst pressure Appr. weight Bending radius Data refer to ambient temperature (20°C). TUBIGOMMA DEREGIBUS S.R.L.

 Open the catalog to page 1

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.