TUSIL® VIEW Suction and light delivery hose suitable for cosmetic, pharmaceutical and food products. Hose tested according to the main norms for food contact materials (FCM – Reg. (CE) 1935/2004). Manufactured according to GMP (Reg. (CE) 2023/2006). Not intended for use as an implant material. Not suitable for blood or human fluids. DESCRIPTION Tube SMOOTH, GLOSSY, TRANSPARENT, HEAT RESISTANT EXTRUDED SILICONE platinum-cured extruded silicone, transparent, phthalates free, tested in STAINLESS STEEL WIRE HELIX compliance with 1907/2006/CE (REACH). Meets FDA 21 CFR 177.2600; USP TRANSPARENT EXTRUDED SILICONE class VI main requirements; European Pharmacopoeia ed. 8.1/2014 3.1.9; ISO 10993 - 4:2017, 5:2009, 12:2012; BfR XV; REGULATION 1935/2004/ CE; Japan Ministry of Health and Welfare Notice No.370,1959, No.201,2006 and revision 2012; 3-A RPSCQC for (62-02) Hose Assemblies; Arrêté du 25 novembre 1992. TECHNICAL CHARACTERISTICS Temperature range : -60°C / +200°C ( -76°F / +392°F ) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose. Norm : ISO 1307 for dimensional tolerances stainless steel wire helix Cover smooth, platinum-cured extruded silicone, transparent, glossy cover. Heat, ageing and ozone resistant Marking refer to guidelines for cleaning and sanitizing on Tudertechnica website Inside diameter Outside diameter TUDERTECHNICA TUSIL® VIEW Working pressure Burst pressure Appr. weight Bending radius Data refer to ambient temperature (20°C). We reserve the right to supply in random lengths shorter than 40mt. TUBIGOMMA DEREGIBUS S.R.L. - Società Unipersonale - Via E. Mattei n° 1 - 35030 Saccolongo (PD) Italia - Tel. +39 / 049 8016155 - Fax. +39 / 049-8015834 - tudertechnica.com