TUSIL® MARINE OND Used as marine main engine exhaust, generator exhaust, engine coolant circulation, engine intake and generator intake. DESCRIPTION Tube silicone, red, heat and salt water resistant Reinforcement WIDE- CORRUGATED, BLUE, HEAT RESISTANT, GLOSSY COVER SILICONE high temperature resistant plies, steel wire helices STEEL WIRE HELICES HIGH TEMPERATURE RESISTANT PLIES wide-corrugated, blue silicone rubber, glossy. Heat, ageing, ozone and paraffin oil resistant RED, HEAT AND SALT WATER RESISTANT SILICONE Marking TUDERTECHNICA TUSIL® MARINE OND TECHNICAL CHARACTERISTICS Temperature range : -60°C / +200°C ( -76°F / +392°F ) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose. Inside diameter Outside diameter Norm : SAE J2006 TYPE R2; ISO 13363:2004 - Type 2 class B; ISO 1307 for dimensional tolerances Working pressure Burst pressure Appr. weight Bending radius Data refer to ambient temperature (20°C); we recommend a reduction of 20% working pressure for every 100°C of temperature increase. Other diameters, wall thickness and pressure only on specific request. We reserve the right to supply in random lengths shorter than 40mt or 20mt. TUBIGOMMA DEREGIBUS S.R.L. - Società Unipersonale - Via E. Mattei n° 1 - 35030 Saccolongo (PD) Italia - Tel. +39 / 049 8016155 - Fax. +39 / 049-8015834 - tudertechnica.com INDUSTRIAL SILICO