TUFLUOR PTFE PHARM ® Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Tubigomma Deregibus S.R.L. Suction and delivery hose designed according to EN 12115 standards for food, cosmetic and pharmaceutical products, chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Hose tested according to the main norms for food contact materials (FCM – Reg. (CE) 1935/2004). Manufactured according to SMOOTH, WHITE, EPDM, CLOTH FINISH GMP (Reg. (CE) 2023/2006). Not intended for use as an implant material. Not suitable for blood or human fluids. STAINLESS STEEL WIRE HELICES SYNTHETIC PLIES SMOOTH, CO-EXTRUDED CLEAR/ WHITE PIGMENTED TEFLON™ PTFE Tube TEFLON™ PTFE, co-extruded clear/white pigmented, smooth, phthalates free, tested in compliance with 1907/2006/CE (REACH). TEFLON™ PTFE is TECHNICAL CHARACTERISTICS a polymer with excellent resistance to high temperature, mechanical stress and oxidation. It complies with FDA 21 CFR 177.1550; DM 21/03/1973 and Temperature range : -40°C / +150°C ( -40°F / +302°F ) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose. Electrical properties : type M according to norm EN 12115 (R<102 Ω) Norm : EN12115 subsequent amendments; USP class VI main requirements; ISO 10993 5:2009, 11:2006; REGULATION 1935/2004/CE; REGULATION 10/2011/CE; REGULATION 1245/2020/CE; 3-A RPSCQC for (62-02) Hose Assemblies. Reinforcement synthetic plies, stainless steel wire helices, a/s wires to discharge static electricity refer to guidelines for cleaning and sanitizing on Tudertechnica website Cover smooth, EPDM, white, cloth finish. Abrasion, ageing and ozone resistant Marking red/white/blue tape TUDERTECHNICA TUFLUOR® PTFE PHARM embossed according to norm EN 12115 TUDERTECHNICA PTFE EN12115:2021 DN SD PN 16 BAR M Q/Y Inside diameter Outside diameter Working pressure Burst pressure Appr. weight Bending radius Data refer to ambient temperature (20°C). We reserve the right to supply in random lengths shorter than 40mt or 20mt. TUBIGOMMA DEREGIBUS S.R.L. - Società Unipersonale - Via E. Mattei n° 1 - 35030 Saccolongo (PD) Italia - Tel. +39 / 049 8016155 - Fax. +39 / 049-8015834 - tudertechnica.com