TUFLUOR® PTFE BIOTECH
1Pages

TUFLUOR PTFE BIOTECH ® Teflon™ is a trademark of The Chemours Company FC, LLC used under license by Tubigomma Deregibus S.R.L. Suction and delivery hose designed according to EN 12115 standards for food, cosmetic and pharmaceutical products, chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Tested and certified hose by BUREAU VERITAS for use in Atex area (Ex-Zone). Manufactured according to GMP (Reg. (CE) 2023/2006). Not intended for use as an implant SMOOTH, WHITE WITH CONDUCTIVE CHIPS, LOW FRICTION, GLOSSY COVER material. Not suitable for blood or human fluids. STAINLESS STEEL WIRE HELICES SYNTHETIC PLIES SMOOTH, BLACK, CONDUCTIVE TEFLON™ PTFE TEFLON™ PTFE, black, conductive, smooth, phthalates free, tested in compliance with 1907/2006/CE (REACH). TEFLON™ PTFE is a polymer with excellent resistance to high temperature, mechanical stress and oxidation. TECHNICAL CHARACTERISTICS It complies with FDA 21 CFR 177.1550; DM 21/03/1973 and subsequent amendments; USP class VI main requirements; ISO 10993 - 5:2009, 11:2006; Temperature range : -40°C / +150°C ( -40°F / +302°F ) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose. Electrical properties : type Ω/T according to norm EN 12115 (R<106 Ω, R<109 Ω through the hose wall) Norm : EN12115 REGULATION 1935/2004/CE; REGULATION 10/2011/CE; REGULATION 1245/2020/CE; 3-A RPSCQC for (62-02) Hose Assemblies. Reinforcement synthetic plies, stainless steel wire helices, a/s wire to discharge static electricity Cover refer to guidelines for cleaning and sanitizing on Tudertechnica website smooth, white with conductive chips, low friction material, non-marking when dragged on the floor, easy to clean, glossy. Oil, chemical, abrasion, ageing and ozone resistant. Meets FDA 21 CFR 177.1520 Marking red/white/blue tape TUDERTECHNICA TUFLUOR® PTFE BIOTECH embossed according to norm EN 12115 TUDERTECHNICA PTFE EN12115:2021 DN SD PN 16 BAR Ω/T Q/Y Inside diameter Outside diameter Working pressure Burst pressure Appr. weight Bending radius Data refer to ambient temperature (20°C). Available also with Teflon™ PTFE co-extruded clear/white pigmented (contact Tudertechnica for datasheet). We reserve the right to supply in random lengths shorter than 40mt or 20mt. TUBIGOMMA DEREGIBUS S.R.L. - Società Unipersonale - Via E. Mattei n° 1 - 35030 Saccolongo (PD) Italia - Tel. +39 / 049 8016155 - Fax. +39 / 049-8015834 - tudertechnica.com