GLIDETECH® UPE FULL CONDUCTIVE Suction and delivery hose designed according to EN 12115 standards for chemical products. Tested and certified hose by BUREAU VERITAS for use in Atex area (Ex-Zone). DESCRIPTION Tube UPE, black, conductive, phthalates free according to 1907/2006/CE (REACH). Meets FDA 21 CFR 177.1520; BfR III; DM 21/03/1973 and subsequent WIDE CORRUGATED, BLACK, CONDUCTIVE, LOW FRICTION, GLOSSY COVER amendments; REGULATION 1935/2004/CE; REGULATION 10/2011/CE; REGULATION 1245/2020/CE. GALVANIZED WIRE HELICES SYNTHETIC PLIES synthetic plies, galvanized wire helices, a/s wire to discharge static electricity Cover wide corrugated, black, conductive, low friction material, non-marking when TECHNICAL CHARACTERISTICS dragged on the floor, easy to clean, glossy. Abrasion, ozone, ageing, oil and chemical resistant Temperature range : -35°C / +100°C ( -31°F / +212°F) The operating temperature of the hose is directly dependent upon the specific fluid been conveyed and the length of time the fluid is in contact with the hose. Electrical properties : type Ω/T according to norm EN 12115 (R<106 Ω, R<109 Ω through the hose wall) Norm : EN12115 Marking white/blue tape TUDERTECHNICA GLIDETECH® UPE FULL CONDUCTIVE embossed according to norm EN 12115 TUDERTECHNICA UHMWPE EN12115:2021 DN SD PN 10 BAR Ω/T Q/Y refer to guidelines for cleaning and sanitizing on Tudertechnica website Inside diameter Outside diameter Working pressure Burst pressure Appr. weight Bending radius Data refer to ambient temperature (20°C). TUBIGOMMA DEREGIBUS S.R.L.