ALUMINUM COUPLINGS FOR IDROCICLONE Reusable aluminum couplings are suitable to be fitted to the external cover of our IDROCICLONE hoses. The fitting is easy and fast: it is only necessary to join the two semi-couplings by fixing the rubber hose inside and attaching the bolts. Once the two semicouplings are fixed, the resistance of the system is assured by internal rounded ribs, which are located on the internal part of the couplings and which can be fixed on the hose cover without damaging the hose surface. With this fitting system, the abrasive material does not get into contact with the metal coupling. In this way, there is no wear on the couplings and they can be used again, even if the hose is worn out. Since the aluminum is a light metal, a better hose handling is granted. Flanges compatible with UNI EN 1092-1 PN 10 (ex UNI 2277). Couplings’ dimensions Hose’s inside diameter Nipple lenght Flange’s dimension Outer diameter Distance between holes Appr. weight TUBIGOMMA DEREGIBUS S.R.L. - Società Unipersonale - Via E. Mattei n° 1 - 35030 Saccolongo (PD) Italia - Tel. +39 / 049 8016155 - Fax. +39 / 049-8015834 - tudertechnica.com