Two-Wire Decoder Interface SPECIFICATION BUSINESS FIELD LANDSCAPE & TURF GREENHOUSE, NURSERY & INDUSTRIAL AGRICULTURE GOLF The Tucor TDI (Two Wired Decoder Interface) -The Tucor TDI retrofits any conventional controller with 2-Wire control capabilities. -The Tucor TDI allows you to take the central control platform that you currently use that doesn’t provide the cost saving benefit of a 2-Wire control interface and add it via the Tucor TDI. -The traditional outputs of any controller can be wired into the TDI and the TDI converts those traditional valve outputs onto a 2-Wire/Decoder path potentially saving you as much as 80% of what it would cost you to extend all of those dedicated wires out to each and every valve location. Much less wire, much less labor and much more savings! The host controller is completely unaware and unaffected by the fact that the valves are actually controlled by the TDI over a 2-Wire path. TDI-F Tucor’s TDI-F enables the use of up to 2 sensor decoders on 2-wire path. Convert your favorite controller to 2-wire! TDI FEATURES -48 Station Capacity -10 Valves -1 Master Valve, with override capability -1 Flow Sensor direct wired Tucor, Inc. 330 Perry Highway Harmony, PA 16037 TEL: 800-272-7472 FAX: 724-935-8233 [email protected] www.tucor.com TDI-F FEATURES -2 Flow Sensors on 2-wire path

Specifications: FEATURES: • 48 Station capacity • Ten valves simultaneously • One Master Valve, with override capability • One Flow Sensor • Distance to valve up to 6100’ (with Tucor 16 AWG wire) • 2-wire short-circuit protection • RKLD-50 decoders, programmable at the TDI • 50 Hz mode for testing 2-wire • Alarm relay, dry contact • Four decoder power-output ranges • Backlit LCD display for system status, alarms, and 2-wire conditions • Backlit LCD display for system status, alarms, and 2-wire conditions • FloGuard for alarm and flow reactions • Station testing • USB port for firmware upgrades...