RKD Decoders & Wire SPECIFICATION BUSINESS FIELD LANDSCAPE & TURF GREENHOUSE, NURSERY & INDUSTRIAL AGRICULTURE GOLF Tucor wire is the preferred means of connecting the field decoders to the RKD. 1-100 Stations (valves). The RKD uses Tucor wire is designed expressly to enthe RKLD-050 decoder to energize valves sure a secure, watertight electrical pathway for decades in the future. in the field. The RKLD-050 is easily programmed by the user with a specific Station ID, then is connected anywhere Field disruptions due to lightning are minimized by use of the SP-100 surge along the 2-wire path. Enabling that protector, which safely absorbs 2-wire Station then turns on the valve. The voltage surges. It adds substantial prodecoder can energize almost any 24 VAC solenoid on the market, and can be tection to the 2-wire path. reprogrammed with a different ID when desired. THE RKD is a decoder-based, 2-wire controller supporting from Dimensions: 1.5" x 1.4" x 2.3" Lead length: 11" Ordered in box-quantity of 10 Normal spark-over voltage: 230V Max. spark-over voltage: 450V Max. current: 20 kA The RKLD-050 Line Decoder SP-100 Surge Protector Tucor Wire An SP-100 must be installed and grounded every 500 feet and at the end of a wire run. Resistance of the 2-wire to ground must be 50Ω or less. 330 Perry Highway Harmony, PA 16037 Insulation: Polyvinylchloride Jacket: Polyethylene Sizes: 12-18 AWG Colors: Red, Green, Yellow, Orange, Blue ‡ Spool lengths (feet): 500, 1000, 2500 ‡ VALVES EVENLY DISTRIBUTED ALONG 2-WIRE (FT.) ‡ Certain colors and spool sizes are special order: contact Tucor for specifics. Tucor Wire: NUMBER OF SIMULTANEOUS PROGRAMS