1. Catalogs
  2. TTI
  3. TGP3100 Series pulse generator

TGP3100 Series pulse generator

TGP3100 Series pulse generator
1 / 12 PagesView full catalog

TGP3100 Series pulse generator

Product catalog summary
Overview: The TGP3100 Series by Aim-TTi is a versatile range of pulse and universal generators, offering single or dual-channel models with capabilities up to 50MHz. These instruments are designed for high precision and low jitter pulse generation, as well as function and arbitrary waveform generation.
Key Features:
  • Pulse waveforms from 1mHz to 50MHz with a minimum rise time of 5ns.
  • Low jitter synchronous and asynchronous operation.
  • Pulse, double pulse, pulse pattern, and PRBS waveforms.
  • High drive capability output providing 20V pk-pk into 50W.
  • Wide range of pulse modulations including AM, FM, PM, FSK, BPSK, SUM, PWM, PDM.
  • Full noise generator to 25MHz with user-defined distribution.
  • Arbitrary waveforms at 800MS/s sampling rate and 16-bit vertical resolution.
  • Programmable via USB, GPIB, and LXI compliant LAN interfaces.
Pulse Generator Operation:
  • Offers pulse repetition rates up to 50MHz with precise control over pulse width, delay, and edge speeds.
  • Pulse widths from 10ns to 800s with a resolution of 100ps.
  • Independently variable rise and fall times from 5ns to 800 seconds.
  • Asynchronous operation with low jitter, suitable for external trigger signals.
  • Double pulse mode and extensive pulse modulations available.
Noise and Function/Arbitrary Generator Operation:
  • Noise generator with variable bandwidth from 1mHz to 25MHz and user-defined amplitude distribution.
  • Function generator capabilities with 16 standard waveforms up to 50MHz.
  • Arbitrary generator with 800MS/s sample clock and up to 4096 waveform points.
Applications:
  • Stress testing designs with defined jitter and delay.
  • Clock frequency simulation with glitch-free parameter changes.
  • Data sequencing patterns for serial data testing.
  • Asynchronous pulse signal conditioning and propagation delay testing.
Additional Features:
  • Waveform Manager Plus software for waveform creation and editing.
  • Digital modulation capabilities including AM, FM, PM, FSK, and BPSK.
  • Sweep and burst modes for all waveform types with internal or external triggering.
Two Channel Operation: The TGP3122 and TGP3152 models offer two-channel operation, allowing for independent or coupled use of both channels. Each channel can operate independently, sharing common external modulation and trigger inputs. Coupled operation allows for synchronized frequency and amplitude adjustments across channels, with options for tracking and inverse tracking modes. Relative phase adjustments are possible with high precision.
Locking and Synchronization: The TGP3100 Series supports external reference and phase locking, using a high-quality TCXO crystal for internal frequency reference. External 10MHz reference signals can be used for higher accuracy. Multiple generators can be synchronized for phase and amplitude modulation, supporting QAM and QPSK.
Remote Connectivity and Interfaces: The generators come with GPIB, USB, and LAN interfaces, allowing comprehensive remote control. The LAN interface supports LXI standards, suitable for large systems, while USB offers a convenient connection for smaller setups. The GPIB interface remains widely used for system applications.
File Storage and Management: Users can store patterns, waveforms, and setups on USB flash drives, with the ability to store up to 1,000 patterns or waveforms and 1,000 setups. The instrument's non-volatile memory can store up to nine complete setups.
Technical Specifications: The document details specifications for various waveforms, including pulse, square, pattern/PRBS, noise, and function waveforms. Key parameters include frequency range, resolution, jitter, and transition times. The specifications vary slightly between 50MHz and 25MHz models.
Modulation Capabilities: The TGP3100 Series supports various modulation types, including AM, FM, PM, FSK, BPSK, and SUM. Each modulation type has specific carrier waveforms and modulation sources, with internal waveforms available for modulation.
Waveform Generation: The document outlines various waveform types including Sine, Square, Ramp, Triangle, Gaussian Noise, and more. Internal frequency ranges from 1mHz to 10MHz with a resolution of 1mHz. Amplitude depth ranges from 0.0% to 100.0% with a resolution of 0.1%.
PWM (Pulse Width Modulation): Carrier waveforms include Pulse and Double Pulse. Modulation sources can be internal, external, or from another channel in dual-channel models. Width deviation ranges from 0% to 100% of pulse width.
PDM (Pulse Delay Modulation): Similar to PWM, with delay deviation ranging from 0% to 100% of pulse delay.
SPDM (Second Pulse Delay Modulation): Utilizes Double Pulse as carrier waveform with delay deviation similar to PDM.
Gated and Triggered Burst: Gated burst operates while the gate signal is true. Triggered burst produces one burst per trigger event. Carrier waveforms include Pulse, Double Pulse, and others. Trigger repetition rate ranges from 2mHz to 50MHz.
Sweep Functionality: Supports frequency sweep for standard and arbitrary waveforms, excluding noise. Sweep modes include linear or logarithmic, with a range from 1mHz to 50MHz.
Dual-channel Operations: Channels can operate independently, equally, or inversely. Frequency and amplitude coupling are supported, allowing changes in one channel to affect the other.
Outputs: Main output impedance is selectable between 5W or 50W. Amplitude accuracy is 1.5% ±5mV at 1kHz for 50W into 50W. DC offset range varies based on load.
Sync Outputs: Various sync options are available for different modulation types, including AM, FM, PM, and others.
Trigger Input: Supports FSK, BPSK, and other triggered operations with a frequency range from DC to 50MHz.
External Modulation Input: For AM, FM, PM, and other modulation types, with a voltage range of ±2.5V full scale.
Digital Interfaces: Includes LAN, USB, and optional GPIB interfaces for remote control. Supports various driver software for integration with applications like LabView.
General Specifications: Features a monochrome graphics display, data entry via keyboard or rotary control, and storage for up to 9 instrument setups. The device is designed for indoor use with specific environmental and safety standards.
See more

Catalog excerpts

TGP3100 Series pulse generator-1

AIM & THURLBY THANDAR INSTRUMENTS TGP3100 Series Advanced Pulse and Universal Generators - Single or Dual Channel True pulse generator operation including low jitter asynchronous pulses 50MHz pulses, 0.1ns period and delay resolution, fully variable rise/fall 50Mbps pulse pattern generation up to 65536 bits with preamble Noise generator with user-defined bandwidth and amplitude density High performance 50MHz/800MS/s arbitrary/function generator Programmable via USB, GPIB and LXI compliant LAN interfaces aimtti.com USA Site | aimtti.us

 Open the catalog to page 1
TGP3100 Series pulse generator-2

TGP3100 Series Pulse and Universal Generators single or dual channels, 50MHz or 25MHz Pulse waveforms from 1mHz to 50MHz, minimum rise time 5ns  Very low jitter synchronous and a��������������������� synchronous operation  Pulse, double pulse, pulse pattern and PRBS waveforms  Pulse period, width and delay resolutions of 100ps or 11 digits  Independently variable rise and fall times from 5ns to 800 seconds  True low jitter asynchronous operation, externally triggered pulses or pulse reconstruction  High drive capability output can provide 20V pk-pk into 50W (unmatched)  Wide range of pulse...

 Open the catalog to page 2
TGP3100 Series pulse generator-3

True Pulse Generators The TGP3100 Series are true pulse generators using all digital techniques. They can replicate the capabilities of traditional pulse generators whilst adding many additional facilities such as pulse modulations. Unlike DDS based function generators the TGP3100 Series can generate pulses up to 50MHz with very low jitter and high resolution of width and delay (100ps). They can also operate in an asynchronously triggered mode with low jitter. A high drive capability output stage enables up to 20 volts pk-pk to be driven into a 50 Ohm load. Application Examples ► Stress testing...

 Open the catalog to page 3
TGP3100 Series pulse generator-4

Features in detail Pulses at up to 50MHz The TGP3100 Series offers pulse repetition rates of up to 50MHz combined with precise control of pulse width, pulse delay and edge speeds. Pulse Generator Operation (1) Low Jitter Asynchronous Operation Unlike a function generator, the TGP3100 Series can generate pulses in response to an external trigger signal with minimal jitter. Exceptional Pulse Precision It achieves this using a compensation system that conventional generators can not replicate. Asynchronous pulse generation mode retains the ability to set width, delay and edge times with high precision....

 Open the catalog to page 4
TGP3100 Series pulse generator-5

Pulse Generator Operation (2) Double Pulse Operation Extensive Pulse Modulations Double pulse mode generates two identical pulses in each cycle with fully variable delay between the two. All other pulse mode capabilities are retained. In addition to pulse width modulation (PWM) the TGP3100 Series offers pulse delay modulation, amplitude modulation, amplitude summing with other waveforms, frequency and phase modulations, plus FSK frequency keying and BPSK phase shift keying. An additional modulation mode allows the delay between pulses to be modulated. Pattern Generation The modulation source...

 Open the catalog to page 5
TGP3100 Series pulse generator-6

Noise & Function/Arbitrary Generator Operation High Performance Noise Generator The TGP3100 Series can act as high performance noise generators of variable bandwidth and amplitude distribution. Noise can be used as a main carrier waveform or as a modulation source for other waveforms. For example it can be used to generate edge jitter on pulse waveforms. Noise bandwidth can be set anywhere between 0.1Hz and 25MHz (12.5MHz on TGP312x models). Amplitude distribution can be gaussian with variable crest factor or it can be fully user defined. Waveform Manager Plus Waveform Manager Plus (version 4)...

 Open the catalog to page 6
TGP3100 Series pulse generator-7

Modulations, Sweep & Burst Digital Modulation, Internal & External As with pulse waveforms, all function and arbitrary waveforms can be digitally modulated. The internal modulation source can use any of the standard or arbitrary waveforms currently within the generator (including noise and PRBS) thus removing the need for an external modulation source. A modulating frequency between 1mHz and 10MHz can be specified. An external modulation input enables any external waveform source to be used when required. The external bandwidth is DC to 5MHz. AM, AM-SC, FM and PM Waveforms can be modulated using...

 Open the catalog to page 7
TGP3100 Series pulse generator-8

Two Channel Operation, Phase Locking ������������� Locking to Other Sources (TGP3122 & TGP3152 only) The generators are available in one channel or two channel versions, the latter incorporating two outputs with identical capabilities. On two channel generators, both channels provide the full performance and specification, along with entirely independent operation when required. The two channel models represent excellent value for money when compared to purchasing two generators. The TGP3100 Series includes external reference and phase locking as standard. Independent Channel Operation Phase...

 Open the catalog to page 8
TGP3100 Series pulse generator-9

File Storage, Remote Interfaces, Rack Mounting UNIVERSAL SERIAL BUS Filing System Patterns, Waveforms and Set-up files can be given user-defined names within the instrument. USB Flash Drive Interface A front mounted USB socket is incorporated for connection of flash memory disk drives which can store up to 1,000 patterns or waveforms and 1,000 setups. Unlimited Waveform/Pattern Storage These drives can be used both to store waveforms permanently and to transfer waveforms from or to a PC. Arbitrary waveform storage within the instrument is limited to four patterns and four waveforms. Each flash...

 Open the catalog to page 9
TGP3100 Series pulse generator-10

TGP3121, TGP3151, TGP3122, TGP3152 Note that specifications apply to 50MHz models (TGP3151 and TGP3152) and that specifications for 25MHz models (TGP3121 and TGP3122), where different, are in [square brackets] directly following the 50MHz specifications. For two channel models (TGP3122 and TGP3152) specification apply to each output. Standard Waveforms Pulse, Square, Double Pulse, Pattern, PRBS (Pseudo Random Binary Sequence), Noise, Pre Defined Function Waveforms (Sine, Square (User Defined Duty Cycle), Triangle, Ramp (User Defined Symmetry), Negative Ramp, DC, Sin(x)/x (User Defined Zero Crossings),...

 Open the catalog to page 10
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.