PRODUCT SUMMARY
15Pages

AIM & THURLBY THANDAR INSTRUMENTS Laboratory DC Power Supplies PRODUCT SUMMARY Laboratory Power Supplies - manual and remote control • Power from 30 watts up to 1200 watts • Single, dual and triple output models • aimtti.com aimtti.us | aimtti.co.u

Thurlby Thandar Instruments Limited UQE3H Test and Measurement InstrumentsProduct Index Laboratory DC Power Supplies manual and bus programmable pages 1 - 11 Linear regulated power supplies page 2 Mixed-mode regulated power supplies page 5 PowerFlex regulated power supplies page 8 Power supply selection table page 11 Electronic dc loads page 12 The following pages are an extract from the 36 page general Aim-TTi Product Summary brochure which also includes laboratory power supplies, precision test instruments, and RF & EMC test equipment. About TTi, Aim and Aim-TTi...

Laboratory Power Supplies 1.Model ranges Laboratory DC Power Supplies A technology leader Aim-TTi is one of the world's major producers of laboratory power supplies (PSUs). It has been a major technology innovator in PSUs since 1979 and offers products ranging from 30 watts up to 1200 watts. Hundreds of thousands of Aim-TTi power supplies are in everyday use around the world. Power technologies Aim-TTi laboratory power supplies use both linear and switch-mode technologies in order to optimise performance and value for money. Linear regulation Pure linear regulation still provides the lowest...

Measurably better value Linear Regulation Power supplies using all linear regulation offer the lowest output noise, the best transient response and the most benign stability characteristics when driving complex loads. The disadvantage is greater physical size and weight for a given power, together with higher heat output. Linear regulation is used on the EL-R, PL, PLH and QL series. ► Linear bench power supplies Dual output and triple output models are available using a similar casing ► Single, dual or triple outputs style. ► 30W to 130W power range The EL302RT triple (illustrated)...

Measurably better value manual & bus programmable - Laboratory Power Supplies 3. PL & PL-P series Model Outputs Voltage / Current Power Interfaces The New PL series represents the successor to best-selling PL series which became an "industry standard". This ultra-compact linear regulated design retains the traditional analog controls of the original PL but adds important digital features. ► High performance power supplies ► Single, dual and triple outputs ► Linear regulation, 48W to 228W ► Manual or bus programmable ► RS-232, USB, LAN or GPIB ► Linear regulation provides ultra-low...

Measurably better value QL & QL-P series II ► High precision power supplies ► Single or triple outputs ► Linear regulation, 105W to 242W ► GPIB/RS-232/USB/LAN interfaces The triple output models incorporate two single output units plus an auxiliary low voltage output. The two main outputs can be put into a linked mode for simultaneous or tracking control. A master on/off system enables all three outputs to be switched synchronously. ▼ detailed views of triple output models Model Outputs Voltage / Current Power Interfaces plus 1 to 6V @ 3A Brief specifications for main...

Measurably better value manual & bus programmable - Laboratory Power Supplies 5. All-linear regulation becomes impractical at higher power levels, so Aim-TTi have developed a technology that combines HF switch-mode pre-regulation with linear final regulation. This technique combines exceptional efficiency with noise levels that are close to that of pure linears. Mixed-mode regulation is used in the EX-R, MX and TSX series. Mixed-mode Regulation Model Outputs Voltage / CurrentPower Interfaces EX355R One 0 to 35V / 0 to 5A 175W - or 0 to 75V / 0 to 4A or 0 to 150V / 0 to 2A Brief...

Measurably better value TSX & TSX-P series ► Mixed-mode regulation ► Very high performance ► Single output, 350W/360W ► Front and rear terminals The TSX series is housed in a 3U halfrack size case suitable for bench use or rack mounting. It uses silent convection cooling for the quietest possible working environment. Model Outputs Voltage / Current Power Interfaces TSX1820 One 0 to 18V / 0 to 20A 360W - Brief specifications: Line and load regulation: <0.01%. Output noise: < 1mV rms. Meter accuracies: voltage - 0.2% ± 1digit, current - 0.5% ± 1digit. Size: 210 x 130 x...

manual & bus programmable - Laboratory Power Supplies 7.MX & MX-P series Model Outputs Voltage / Current MX100T Three See Range Combinations MX100TP Three See Range Combinations Brief specifications: Line regulation: <0.01%. Load regulation: <0.01%. Output noise: < 3mV rms. Setting accuracy: voltage - 0.05% ± 3mV current - 0.3% ± 3mA. Size: 210 x 130 x 380mm (WxHxD); Weight: 4.6kg ► Three high performance outputs of 105 watts each 3 x (0 to 35V at 0 to 3A) ► Total power of 315 watts in a highly compact package ► Range switching gives up to 70 volts and up to 6 amps ► Twelve range...

Measurably better value PowerFlex Regulation The Aim-TTi PowerFlex system uses a modified form of mixed-mode regulation to provide higher levels of current when the voltage is set to lower values. PowerFlex+ uses a multi-phase conversion system and offers a wider range of voltage/current combinations. PowerFlex regulation is used on the CPX series and the QPX1200S. PowerFlex+ regulation is used on the QPX750S and QPX600D. ► PowerFlex regulation CPX series models share a highly compact case style - 3U quarter rack ► Higher current at lower voltage ► Single or dual outputs ► Up to 840...

Measurably better value manual & bus programmable - Laboratory Power Supplies 9 Model Outputs Voltage / Current Power_Interfaces Brief specifications: Line & load regulation: <0.01%. Output noise: < 3mV rms. Setting accuracies: voltage - 0.1% ± 2mV current - 0.3% ± 20mA. Size: 350 x 130 x 415mm (WxHxD) * Note: max. current is not available with max. voltage, see PowerFlex curve. ► 1200 watts PowerFlex/PowerFlex+ ► Higher currents at lower voltages ► Up to 80 volts and up to 50 amps ► Analog, RS-232, USB, GPIB & LAN With a current capability of 20 amps at the maximum output of...