AIM & THURLBY THANDAR INSTRUMENTS Precision Measurement & RF Test Equipment PRODUCT SUMMARY Digital Multimeters • Component Meters • Current Measurement • Power Source Testing • Frequency Measurement • RF Spectrum Analysis • RF Signal Generation • Power & EMC Harmonics Analysis • aimtti.com aimtti.us | aimtti.

Digital Multimeters - page 22 Bench-top digital multimeters with true rms ac and digital control interfaces. Component Measurement - page 24 Precision LCR bridge, micro-ohm meter. I-prober Current Probe - page 25 Innovative probe for applications that include non-contact measurement of currents in PCB tracks. Electronic DC Loads - page 26 Electronic DC Loads for power supply and battery testing. Frequency Measurement - page 27 Bench-top universal counters and handheld frequency meters up to 6GHz. Power Analysis See RF & EMC section (page 27) Precision measurement instruments Aim-TTi has been...

Measurably better value precision measurement - Digital Multimeters 23 ► 40,000 counts, auto or manual ranging ► Accuracy and resolution, 0.08%, 10gV, 10mW ► Large and bright LED display (14mm/0.56") ► True RMS ac functions, wide ac bandwidth ► Relative, T-Hold and Min-Max functions included ► Optional PC control and logging software The 1604 is a high quality 40,000 count bench-top multimeter with a wide range of features. It offers automatic or manual ranging, high resolution (10gV, 10mW) together with current measurement up to 10A. ► 4% digit bench-top multimeter ► 0.08% basic dc-v accuracy ►...

24. Component Measurement - precision measurement LCR400 LCR bridge 0.1% basic measurement accuracy Three test frequencies of 100Hz, 1kHz and 10kHz  Automatic component recognition  Built-in 4 terminal component fixture  Dual 5 digit high brightness displays  Limits comparator with multiple pass and fail bins  RS-232 interface for PC connectivity  Optional SMD tweezers, Kelvin Clip leads, Windows logging software   Built-in component fixture  Built-in limits comparator  RS-232 interface Measurably better value Note: Full technical details are available on the web site. Note: accessories...

Measurably better value precision measurement - Current Measurement 25. I-prober 520 Note: Full technical details are available on the web site. ► Current measurement from non-contact probing of conductor ► Suitable for observation and measurement of current in PCB tracks, component leads and ground planes ► Wide dynamic range of 10mA to 20A peak to peak ► Wide bandwidth of DC to 5MHz ► Low noise equivalent to <6mA rms ► Safety rated to 300V Cat II (600V Cat I) ► Suitable for connection to any oscilloscope ► High accuracy general purpose H-field probe ► Convertible into standard 'closed magnetic...

26. Power Source Testing - precision measurement Measurably better value LD300 dc load  300 watt dc electronic load  Up to 80 volts or 80 amps  CI, CR, CV and CP modes  Built-in transient generator Note: Full technical details are available on the web site. Versatile solution for testing dc power sources Constant current, constant resistance, constant conductance, constant voltage and constant power modes  Wide voltage and current range, 0 to 80 volts and 0 to 80 amps.  300 watts continuous dissipation at 40oC (320W at 28oC)  Low minimum operating voltage of <1V at 40A  Ten turn controls...

Measurably better value precision measurement - Frequency Measurement 27 ► 0.001Hz to 3000MHz or 6000MHz frequency range ► TCXO timebase with better than 1ppm stability ► Frequency, period, pulse width and totalise modes ► Reciprocal counting measurements ► High impedance measurement up to 125 MHz ► Low pass filter, attenuator and trigger level control ► AC or DC coupling, 1M/50W selection, polarity invert ► Large 10 digit LCD display with annunciators ► Operation from built-in rechargeable batteries ► Low power consumption ► Remote control and readback via USB The TF930 and TF960 are a high...

RF and EMC Test Equipment RF Test The rapid growth in the use of wireless communications and the inclusion of RF elements into many electronic designs has increased the need for RF test equipment. The high cost of products from the major producers in this area has led Aim-TTi to develop lower cost alternatives for the essential RF tools such as signal generators and spectrum analyzers. RF products from Aim-TTi are designed to offer the essential elements required by engineers at significantly lower costs. EMC Test Most countries have now implemented legislation requiring products to comply with...

rf & emc test equipment - Spectrum Analysis 29. Model_Frequency Range Size and weight: 190mm high x 92mm wide x 49mm deep 560 grams The PSA3605 and PSA6005 are high performance, highly portable RF spectrum analyzers. They use the latest digital techniques to provide performance comparable to instruments of much greater size, weight and cost. ► True handheld spectrum analyzers ► 3.6 GHz and 6.0 GHz models ► Advanced digital processing ► 4.3" colour touch-screen The PSA Series 5 retains the same compact and lightweight design of the Series 2 but adds some important features as well as extending...

30. Signal Generators - RF & EMC test equipment Measurably better value TGR1040  1 GHz signal generator  -127dBm to +7dBm  RS-232, optional GPIB  Low cost Note: Full technical details are available on the web site. 10MHz to 1000MHz frequency range Accuracy better than 1ppm over 15oC to 30oC  Ageing better than 1 ppm over one year  Low phase noise and low leakage  -127dBm to +7dBm amplitude, 0.1dB steps  Amplitude entry in dBm or µV / mV  FM modulation, internal or external  Four line back-lit dot matrix LCD display  Keyboard and rotary encoder control  Non-volatile storage for 9 generator...

Measurably better value RF & EMC test equipment - Signal Generators/Power Meters 31. TGR6000  6 GHz signal generator  -110dBm to +7dBm Note: Full technical details are available on the web site. 10MHz to 6000MHz frequency range Accuracy better than 1ppm over 15oC to 30oC  Ageing better than 1 ppm over one year  Low phase noise and low leakage  -110dBm to +7dBm amplitude, 0.1dB steps  Amplitude entry in dBm, µV / mV, or dBµV  User compensation tables for specific test set-ups  Fast stepping sweep with dwell times down to 10ms  Internal or externally triggered sweep, lin or log, up or...