Aim-TTi Shortform Catalogue Issue 7 - 36 Pages

Add to MyDirectIndustry favorites
Aim-TTi Shortform Catalogue Issue 7

Catalog excerpts

Laboratory Power Supplies Function, Arbitrary & Pulse Generators Precision Measurement Instruments RF and EMC Test Equipment Measurably Better Value

 Open the catalog to page 1

About TTi and Aim-TTi Excellence through experience Aim-TTi is the trading name of Thurlby Thandar Instruments Ltd. (TTi), one of Europe's leading manufacturers of test and measurement instruments. The company has wide experience in the design and manufacture of advanced test instruments and power supplies built up over more than thirty years. The company is based in the United Kingdom, and all products are built at the main facility in Huntingdon, close to the famous university city of Cambridge. Laboratory DC Power Supplies manual and bus programmable Linear regulated power...

 Open the catalog to page 2

Laboratory Power Supplies 1.Model ranges Laboratory DC Power Supplies A technology leader Aim-TTi is one of the world's major producers of laboratory power supplies (PSUs). It has been a major technology innovator in PSUs since 1979 and offers products ranging from 30 watts up to 1200 watts. Hundreds of thousands of Aim-TTi power supplies are in everyday use around the world. Power technologies Aim-TTi laboratory power supplies use both linear and switch-mode technologies in order to optimize performance and value for money. Linear regulation Pure linear regulation still provides the lowest...

 Open the catalog to page 3

2. Laboratory Power Supplies - manual & bus programmable Linear Regulation Power supplies using all linear regulation offer the lowest output noise, the best transient response and the most benign stability characteristics when driving complex loads. The disadvantage is greater physical size and weight for a given power, together with higher heat output. Linear regulation is used on the EL-R, PL, PLH and QL series. ► Linear bench power supplies ► Single, dual or triple outputs ► 30W to 130W power range ► Switched remote sense terminals ► RS-232 interface model available Dual output and...

 Open the catalog to page 4

Measurably better value manual & bus programmable - Laboratory Power Supplies 3. PL & PL-P series Model    Outputs Voltage / Current    Power Interfaces The New PL series represents the successor to best-selling PL series which became an "industry standard". This ultra-compact linear regulated design retains the traditional analog controls of the original PL but adds important digital features. ► High performance power supplies ► Single, dual and triple outputs ► Linear regulation, 48W to 228W ► Manual or bus programmable ► RS-232, USB, LAN or GPIB ► Linear regulation provides ultra-low...

 Open the catalog to page 5

QL & QL-P series II ► High precision power supplies ► Single or triple outputs ► Linear regulation, 105W to 242W ► GPIB/RS-232/USB/LAN interfaces The triple output models incorporate two single output units plus an auxiliary low voltage output. The two main outputs can be put into a linked mode for simultaneous or tracking control. zl.'jh :i n n n :/./_/ u u Model    Outputs    Voltage / Current    Power    Interfaces plus 1 to 6V @ 3A Brief specifications for main outputs: Line & load regulation: <0.01%. Output noise: < 0.35mV rms. Setting accuracies: voltage - 0.03% ± 5mV, current - 0.2%...

 Open the catalog to page 6

Measurably better value manual & bus programmable - Laboratory Power Supplies 5. All-linear regulation becomes impractical at higher power levels, so Aim-TTi have developed a technology that combines HF switch-mode pre-regulation with linear final regulation. This technique combines exceptional efficiency with noise levels that are close to that of pure linears. Mixed-mode regulation is used in the EX-R, MX and TSX series. Mixed-mode Regulation Model Outputs Voltage / Current Power Interfaces EX355R    One    0 to    35V    / 0 to    5A    175W    - or 0 to 75V / 0 to 4A or 0 to 150V / 0 to...

 Open the catalog to page 7

Measurably better value TSX & TSX-P series ► Mixed-mode regulation ► Very high performance ► Single output, 350W/360W ► Front and rear terminals The TSX series is housed in a 3U halfrack size case suitable for bench use or rack mounting. It uses silent convection cooling for the quietest possible working environment. TSX1820 Model Outputs Voltage / Current Power Interfaces TSX1820    One    0 to 18V / 0 to 20A    360W    - Brief specifications: Line and load regulation: <0.01%. Output noise: < 1mV rms. Meter accuracies: voltage - 0.2% ± 1digit, current - 0.5% ± 1digit. Size: 210 x 130 x...

 Open the catalog to page 8

Measurably better value manual & bus programmable - Laboratory Power Supplies 7. MX & MX-P series Model Outputs Voltage / Current MX100T    Three    See    Range Combinations Brief specifications: Line regulation: <0.01%. Load regulation: <0.01%. Output noise: < 3mV rms. Setting accuracy: voltage - 0.05% ± 3mV, current - 0.3% ± 3mA. Size: 210 x 130 x 380mm (WxHxD); Weight: 4.6kg/5.0kg The MX series are compact multi-output power supplies using mixed-mode regulation with the added flexibility of range switching. ► Three full-performance outputs ► Up to 378 watts total power ► Multiple...

 Open the catalog to page 9

8. Laboratory Power Supplies - manual & bus programmable PowerFlex Regulation PowerFlex+ uses a multi-phase conversion system and QPX600D. offers a wider range of voltage/current combinations. The Aim-TTi PowerFlex system uses a modified form of mixed-mode regulation to provide higher levels of current when the voltage is set to lower values. PowerFlex regulation is used on the CPX series and the QPX1200S. PowerFlex+ regulation is used on the QPX750S and ► PowerFlex regulation ► Higher current at lower voltage ► Single or dual outputs ► Up to 840 watts total power ► USB, RS232, GPIB & LAN...

 Open the catalog to page 10

All TTI catalogs and technical brochures

  1. QPX

    8 Pages

  2. PRODUCT SUMMARY

    15 Pages