Aim-TTi Power Supplies Shortform Catalogue
12Pages

Measurably better value LABORATORY DC POWER SUPPLIES SHORTFORM CATALOGUE aimtti.com

A TECHNOLOGY LEADER Aim-TTi is one of the world’s major producers of laboratory power supplies (PSUs). It has been a major technology innovator in PSUs since 1979 and offers products ranging from 30 watts up to 1200 watts. Hundreds of thousands of Aim-TTi power supplies are in everyday use around the world. POWER TECHNOLOGIES Aim-TTi laboratory power supplies use both linear and switch-mode technologies in order to optimize performance and value for money. LINEAR REGULATION Pure linear regulation still provides the lowest output noise and best transient response. The disadvantage is greater...

f Single, dual or triple outputs f 30W to 130W power range f Output noise: < 1mV rms f 4 digit voltage and current meters on each output EL SERIES COMPACT BENCH POWER SUPPLIES The EL series is the ideal solution for users requiring a good quality manual control, linear regulated bench power supply of low to medium power. The series offers dual displays, high resolution control and metering, remote sensing, dc output switches and silent fan-free operation. The EL302RT triple has a variable voltage auxiliary output which can be set using the digital displays. For those requiring a basic bus...

f Single, dual or triple outputs f 175W to 305W power range f Output noise: < 2mV rms. f Switched remote sense terminals EX SERIES COMPACT BENCH POWER SUPPLIES The EX-R series combines high frequency switch-mode pre-regulation with linear post-regulation to provide performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. From 175W to 420W Single, Dual and multi-range models are available with USB programmable single EX355P. The EX752M is a dual output 300 watt PSU with Multi-Mode capability up to...

f Single, dual and triple outputs f 48W to 228W power range f Output noise: < 0.4mV rms PL SERIES HIGH PERFORMANCE POWER SUPPLIES The PL series is for users requiring an advanced linear regulated precision bench power supply that retains conventional analog controls. Facilities including S-Lock Locks your settings at the touch of a button and V-Span to choose a voltage range that suits your task. A low current range provides metering with 0.1mA resolution and enables lower currents to be set with more precision. It’s ultra-compact design uses minimal space on the bench or rack. The PLH...

f Single or triple outputs f 105W to 242W power range f Output noise: < 0.35mV rms. QL SERIES II HIGH PRECISION POWER SUPPLIES The QL Series represents the state-of-the-art in a linear regulated laboratory PSU. Very high precision is matched by very low output noise. The digital user interface combines speed with safety. Power is in excess of 100 watts per output, and multiple ranges provide higher current at lower voltages. The triple output models incorporate two single output units plus an auxiliary low voltage output. The two main outputs can be put into a linked mode for simultaneous...

f 350W to 360W power range f Output noise: < 1mV rms. f Front and rear terminals TSX SERIES II HIGH PERFORMANCE POWER SUPPLIES The TSX series offers exceptionally good noise and transient performance. The switch-mode pre-regulation uses ultra low capacitance components to minimise common mode noise, while the linear final regulator minimises differential output noise. It uses silent convection cooling for the quietest possible working environment. Local operation convenience features of the TSX-P series include an auxiliary display for displaying other data such as increment values, OVP...

f 3 or 4 full-performance outputs f 315W to 420W power range f Output noise: < 3mV rms. f Multiple voltage/current ranges MX SERIES MULTI OUTPUT POWER SUPPLIES The MX series are compact multi-output power supplies using mixed-mode regulation with the added flexibility of range switching. The MX series has three or four full function outputs with fully variable voltage and current along with OVP and OCP trips. Each output features CV or CI operation, simultaneous high resolution metering, switchable remote sensing, and an individual output switch. To increase its ability to match the widest...

f Single or dual outputs f 360W to 840W power range f Output noise: < 3mV rms. f Higher current at lower voltage CPX SERIES POWERFLEX POWER SUPPLIES The CPX series is designed to meet the need for flexibility in the choice of voltage and current. Today’s engineers often need a wide voltage range capability and a high current capability. Normally, however, the maximum voltage and maximum current are not required simultaneously. A conventional PSU has a fixed current limit giving a power capability that reduces directly with the output voltage. The Aim-TTi PowerFlex design enables higher...

f Single or dual outputs f 600W to 1200W power range f Output noise: < 3mV rms. f Higher currents at lower voltages QPX SERIES POWERFLEX POWER SUPPLIES The QPX series offers users a level of flexibility that cannot be achieved with conventional laboratory power supplies. The Aim-TTi PowerFlex design enables higher currents to be generated at lower voltages within an overall power limit envelope. These power supplies are suited to both bench-top and system applications with front and rear terminals and a wide range of interfaces. Model Voltage / Current Analog only RS232/USB/LAN/GPIB...

OTHER RANGES AVAILABLE WAVEFORM GENERATORS PULSE GENERATORS DIGITAL ANALOG ARBITRARY GENERATORS FUNCTION GENERATORS FUNCTION GENERATORS � Analog and Digital (DDS) function generators with frequency capability up to 240MHz. � Dedicated pulse generators with true pulse capability. � True variable-clock arbitrary generators with up to four channels. SIGNAL GENERATORS HARMONICS ANALYSERS SPECTRUM ANALYSERS LOW-DISTORTION SOURCE � RF signal generators with frequency capability up to 6GHz. � Handheld RF spectrum analyzers with frequency up to 6GHz. � EMC analyzers for power Harmonics and Flicker....