submersible sewage pumps vortex impeller

Selection Table Model Number Designation Submersible Sewage Pumps with Vortex Impeller Tsurumi UT/U-series pumps are heavy-duty submersible pumps equipped with a vortex impeller for pumping sewage and wastewater. The semi-vortex design provides a solids passage that is 70% or more* of the discharge bore, thus reducing troubles caused by the clogging of fibrous solids to a minimum. The UTZ-series pumps are automatic models equipped with a simple float switch that prevents dry-running operation and reduces power consumption. These series lineup offer discharge bores ranging from 40 - 80 mm and...

Pump with handle for portability Anti-wicking Cable Entry Motor Protector Miniature Thermal Protector (0.4 kW and below of single-phase motor) Prevents water incursion due to capillary action should the cable sheath be damaged or the end of cable submerged. Also prevents moist air from infiltrating the motor housing and condensation from forming inside the housing due to temperature differences between the housing and outside air. Detects excess heat, therefore, protecting the pump against overheating and dry-running. Circle Thermal Protector Directly cuts the motor circuit if excessive heat...

U (1.5-3.7 kW) -Vortex Impeller- Specifications The UT-series is a 2-pole motor, compact and economical type submersible pump equipped with a vortex impeller for sewage and wastewater. The semi-vortex design provides a wide 35 mm large solids passage that reduces clogging of solid matter to a minimum. In addition, the UTZ-series is an automatic model equipped with a simple float switch that prevents dry-running operation and reduces power consumption. The U-series is a 2-pole motor, compact type submersible pump equipped with a vortex impeller for pumping sewage and wastewater. The semi-vortex...

Guide Rail Fitting System Every Tsurumi sewage/wastewater pump can be used in combination with a guide rail fitting system. The system connects the pump to and from the piping easily just by lowering and hoisting the pump, allowing easy maintenance and inspection without the need to enter the sump. The type of compatible guide rail fitting set varies depending on the pump model. Refer to the selection table of each pump model for the selection of the right combination. Guide Rail Fitting Operation The TOK set is a resin made guide rail fitting system suitable for use with a small cast iron made...

& Tsurumi Pumpwww.tsurumi-global.com We reserve the right to change the specifications and designs without prior notice. The OO series and model OO are indicated with our series/model codes in this catalog. Your Dealer TSURUMI MANUFACTURING CO., LTD.© 2022 TSURUMI MANUFACTURING CO., LTD. Printed in Japan IA113-G HB-C-C-Z