RSR-KS_IA103-F
7Pages

Catalog excerpts

^Tsurumi Pump www.tsurumi-global.com

Tsurumi's RSR-KS series rotary air blowers are equipped with a 3-lobe spur rotor. This rotor, as the most important component of a blower, is designed for corrosion resistance, heat resistance and durability, in addition to low noise, low vibration, ease of maintenance and high efficiency, thus providing stable performance, and ensuring smooth operation of the blower over a long period of time. The product lineup of the RSR-KS series comprises air-cooled types (discharge bore diameter: 50 to 300 mm) and water-cooled types (discharge bore diameter: 80 to 350 mm) as standard models. Whether...

Open the catalog to page 2

Blower with 3-lobe Spur Rotor Installation Diagram Rotor The 3-lobe spur rotor is designed for corrosion resistance, heat resistance and durability, in addition to low noise, low vibration and high efficiency operation. Casing Fluid is drawn from the inlet on the upper stage and discharged from the side on the lower stage. This structure reduces noise and provides higher efficiency. Side Cover The side cover supports the bearing and is structured to allow compressed air that has leaked via the shaft to flow out of the casing, without intrusion into other components. With water-cooled type...

Open the catalog to page 3

Selection Chart (for reference) Model (Discharge Bore) in mm

Open the catalog to page 4

< RSR2-80WKS > Selection Chart (for reference) Model (Discharg e Bore) in mm • The motor must be selected with 10 to 20% margin from the required power (La in kW). • The standard condition is defined as a temperature of 20°C, absolute pressure of 101.3kPa, and relative humidity of 70%. • For blowers with a discharge bore diameter of 80 to 250mm, the 3-lobe spur rotor can be exchanged with a helical rotor (option). • In case of operating at 0.9kg/cm2 (88.2kPa), if you need a larger model, contact your dealer or Tsurumi representative.

Open the catalog to page 5

Pumps and Wastewater Treatment Equipment Tsurumi can supply pumps and wastewater treatment equipment as a total package. Sewage & Wastewater Pump Discharge Bore : 50-350 mm Motor Output : 0.4-75 kW Air-inlet Bore : 25-50 mm Motor Output : 0.75-5.5 kW Air-inlet Bore : 32-150 mm Motor Output : 0.75-40 kW Flow Rate : 1.4-42 m3/min Motor Output : 0.25-7.5 kW Floating Scum Skimmer Floating Decanter Discharge Bore : 50 mm Motor Output : 0.4-0.75 kW Discharge Bore : 40-80 mm Motor Output : 0.25-1.5 kW Treating Capacity Total Motor Output Bar Spacing : 1-50 mm Motor Output : 0.09 kW Common Base...

Open the catalog to page 6

& Tsurumi Pumpwww.tsurumi-global.com We reserve the right to change the specifications and designs without prior notice. The OO series and model OO are indicated with our series/model codes in this catalog. Your Dealer TSURUMI MANUFACTURING CO., LTD.© 2022 TSURUMI MANUFACTURING CO., LTD. Printed in Japan IA103-F NPC-X-B-Z

Open the catalog to page 7

RSR-KS_IA103-F 7Pages

Catalog excerpts

All TSURUMI MANUFACTURING CO. catalogs and technical brochures

RSR-KS_IA103-F
7Pages