PNI&PNI(AUTO)_IA115-B
5Pages

{{requestButtons}}

Catalog excerpts

PNI&PNI(AUTO)_IA115-B - 1

submersible resin made pumps

Open the catalog to page 1
PNI&PNI(AUTO)_IA115-B - 2

Submersible Resin Made Wastewater Pumps Tsurumi’s PNI-series of submersible wastewater pumps are made of resin and stainless steel, which makes them compact, lightweight and easy to handle. The pumps feature an energy-saving design that reduces power consumption by approx. 20% in comparison with competitor pumps of equivalent output class. The combination of resin and stainless steel provides excellent durability and corrosion resistance regardless of the lightweight body. And, the resin material used for these pumps is selected for the relevant parts. Therefore, the PNI-series is more...

Open the catalog to page 2
PNI&PNI(AUTO)_IA115-B - 3

Special Resin The resin used for the PNI-series is not simple resin, but special resins produced by applying advanced treatment to elaborate compound material. Each pump component is made of resin that has been compounded at the optimum ratio for the role of the relevant parts. Therefore, the PNI-series is more advantageous in terms of durability and corrosion resistance than simple resin pumps. PPS-(MD+GF)50 - Excellent heat resistance and chemical resistance, and high mechanical strength PPO-GF20 - Water-proofing, and resistance to acids and alkalis ABS-GF20 - Excellent impact resistance,...

Open the catalog to page 3
PNI&PNI(AUTO)_IA115-B - 4

AUTO Type - Automatic Operation • Automatic and manual operation modes can be changed over with a single switch. • The bell-shaped float moves only up/down, so this pump is suitable for installation in limited/cramped places. • This model enables drainage at lower water levels than pumps with a float for general start/stop water level. • With the adjustable float switch, this pump can work at a water level suitable for field conditions. • The possibility of float malfunction is low, even in wastewater containing a certain amount of oil. Automatic Operation The process is repeated....

Open the catalog to page 4
PNI&PNI(AUTO)_IA115-B - 5

Product images and specifications may differ from actual products due to improvements. The OO series and model OO are indicated with our series/model codes in this catalog. Your Dealer TSURUMI MANUFACTURING CO., LTD.© 2019 TSURUMI MANUFACTURING CO., LTD. Printed in Japan IA115-B HB-C-E-W

Open the catalog to page 5

All TSURUMI MANUFACTURING CO. catalogs and technical brochures

  1. VANCS_IA114-D

    13 Pages

  2. UT_U_IA113-G

    6 Pages

  3. TSR_IA105-C

    4 Pages

  4. THM(S)_IA142-C

    11 Pages

  5. TAR_IA120-A

    7 Pages

  6. SSP_IA109-A

    3 Pages

  7. SF_IA118-D

    3 Pages

  8. RS_IA104-H

    5 Pages

  9. MG_IA127-A

    3 Pages

  10. GPN_IB108-E

    4 Pages

  11. FSP_IA106-C

    2 Pages

  12. FHP_IA107-F

    3 Pages

  13. CZ_IA111-A

    7 Pages

  14. C_IA112-K

    9 Pages

  15. BZ_IA101-A

    9 Pages

  16. B_IA100-A

    9 Pages

  17. AB_ID106-B

    2 Pages