SUBMERSIBLE HIGH HEAD DRAINAGE PUMPS

Submersible High Head Drainage Pumps Tsurumi LH/LH-W series pumps are submersible heavy-duty pumps specialized for high head. These pumps are available in a wide lineup, offering 3 to 110 kW motor output and 18 to 230 m maximum head. The LH/LH-W series has played an active role in various fields, from small/medium-scale civil engineering and construction work that requires high reliability, to large-scale projects for constructing tunnels, bridges and dams. And, because of their slim body, these pumps have proven to be particularly useful for deep well dewatering and mine pit drainage where required...

With over 95 years of history, the Tsurumi Pump Brand continues to receive MaJOf Applications worldwide support with its superior quality, exceptional durability and solid reliability.

□ Seawater-Resistant Version Tsurumi's pumps can be combined with a seawater-resistant kit (optional) that adds a “galvanic anode” and “seawater-resistant special cast iron impeller,” and enables about two years of service. (The service period depends on operating conditions.) For details, refer to the Seawater-Resistant Pumps catalog [IB115]. Selection Table Motor Output (kW) ★ : Tandem operation model: Same model pumps are connected in series, to deliver higher head. □ High Temperature Liquids Version Tsurumi's pumps are applicable to high temperature liquids of up to 80°C. Pumps of the standard...

Top Discharge, Flow-thru Design This design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability, and also allows the shape of the pump to be cylindrical and slim for installation in a well casing for deep well dewatering. (Single Impeller) (Dual Impellers) 11 1 Anti-wicking Cable Entry Prevents water incursion due to capillary action should the cable sheath be damaged or the end of cable submerged. Also prevents moist air from infiltrating the motor housing and condensation from forming inside the housing due to temperature...

Performance Curves < 80-100mm > The LH-series is a submersible three-phase cast iron high head drainage pump. Being the pump cylindrical and slim, it can be installed in a well casing for deep well dewatering. The center flange construction assures a stable installation even if it is fixed by the discharge pipe. The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. The pump incorporates seal pressure relief ports that prevent the pumping pressure from applying to the shaft seal.*

LH-W -Dual Impellers- Performance Curves< 3-30kW > The LH-W-series is a submersible three-phase cast iron extra high head drainage pump having dual impellers. Being the pump cylindrical and slim, it can be installed in a well casing for deep well dewatering. The center flange construction assures a stable installation even if it is fixed by the discharge pipe.*1 The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. The pump incorporates seal pressure relief ports that prevent the pumping...

LH-D -Double Suction Impeller- Performance Curves The LH-D-series are submersible pumps with 2-pole 110/185 kW motors, on which a double suction impeller is mounted to deliver assured performance in high volume, high head applications. These pumps were developed based on Tsurumi's LH-series that has built a long-standing name and reputation as a quality line of submersible high head drainage pumps in the mining and construction fields. With a max. capacity of 14 m3/min and max. head of 92 m, the LH10110D and LH12185D meet the needs of open-pit/underground mining, heap leaching and large-scale...

Tandem Operation “Tandem operation” is an operation method that connects two pumps of the same model in series. This provides double pump head at the same flow rate in comparison with that of a single pump. The principle of tandem operation is the same as that with multistage pumps. Lifting Chain or Wire Rope Precautions for Selection and Use For model selection, piping and installation procedure, be sure to consult Tsurumi distributors in advance. 1. If the required total head exceeds the maximum head of the pump without the intermediate connection pipe shown in the selection table, Discharge...

“Tandem operation” is an operation method that connects two pumps of the same model in series. This provides double pump head at the same flow rate in comparison with that of a single pump. The principle of tandem operation is the same as that with multistage pumps. The LH and LH-W series pumps adopt the center flange construction to align the discharge pipe with the cylindrical pump center axis*. Connecting the pumps in series with the tandem connector can provide higher pump head without affecting the advantage of the slim design. At construction sites, there are many cases where a higher pump...

Weights excluding cable *2 Star-Delta available upon request

C.W.L.: Continuous Running Water Level An excellent choice for deep well dewatering! Tsurumi LH/LH-W series of submersible pumps are an excellent choice for worksites where deep well dewatering is used to deal with groundwater issues. Their slim body, high head performance and pressure-resistant construction meet the seepage and drainage challengesof excavated pits that require deeper, narrower wells.

Tsurumi Pump We reserve the right to change the specifications and designs without prior notice. The OO series and model OO are indicated with our series/model codes in this catalog. Your Dealer TSURUMI MANUFACTURING CO., LTD.© 2021 TSURUMI MANUFACTURING CO., LTD. Printed in Japan IB106-D HB-X-E-Y