*mydirectindustry

Catalogs
Tsubakimoto Chain
Tsubaki Plastic Top Chain TTUP826-LLPC

Tsubaki Plastic Top Chain TTUP826-LLPC

Product catalog summary

Overview: This document provides technical specifications and guidelines for Tsubaki's Plastic Top Chain model TTUP826-LLPC, including material properties, dimensions, and operational parameters.

Specifications:

Chain Material: Stainless Steel Pins with options for Ultra Low Friction and Low Friction/Anti-Wear materials.
Dimensions: Various measurements provided, including chain width, pin diameter, and minimum flex radii.
Load and Speed: Maximum allowable load is 1.08 kN (110 kgf), with a maximum speed of 100 m/min with lubrication and 50 m/min without.
Operating Temperature: Ranges from -20°C to 80°C, with specific conditions for wet environments.

Procedures and Recommendations:

Ensure no spaces between letters and symbols in documentation.
Plastic pins are not available for this model.
Contact Tsubaki for custom orders and further information.

Components and Accessories:

Sprockets: Made from reinforced polyamide, available in various sizes and configurations. Operating temperature range is -20°C to 80°C.
Corner Rails and Split Sprockets: Available in engineering plastic, with specific assembly instructions to avoid mixing components from different sprockets.
Idler Wheels: Specifications provided for effective number of teeth and material composition.

Contact Information: Tsubakimoto Chain Co. and Tsubaki Yamakyu Chain Co. contact details provided for further inquiries and product support.

Notes: Specifications are subject to change without notice as part of Tsubaki's product improvement policy.

Catalog excerpts

Tsubaki Plastic Top Chain TTUP826-LLPC-1

Greatly improved chain that prevents floating by lowering the center of gravity Model Numbering Chain type Chain material Material mark Link color Chain type Note: Do not leave spaces between letters and symbols. Plate width Dark gray Max.allowable speed With lube m/min No lube Operating temperature range :Standard, :Made-to-order product Contact a Tsubaki representative for further information. 2. Operating temperature of 65 is for wet conditions. Chain (Staineless Steel Pins) Material mark Note:Plastic pins are not available.

Open the catalog to page 1

Tsubaki Plastic Top Chain TTUP826-LLPC-2

Shaft Teeth Diameter d Body Reinforced polyamide Color: Black Material Bolt Stainless steel Brass+ nickel plating Note: 1. Standard product. 2. Operating temperature range: 20to 80 3. Bolt tightening torque:6 N m.61 kgf m 0 4. When assembling the halves of the sprocket, do not mix the halves with halves from other sprockets. Steel sprockets are also available upon request. Contact a Tsubaki representative for further information. Ider Wheels Note: 1. Standard product. 2. Operating temperature range: 20to 80 3. Bolt tightening torque:6 N m.61 kgf m 0 4. When assembling the halves of the sprocket,...

Open the catalog to page 2

All Tsubakimoto Chain catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list