PLASTIC TOP CHAIN TORP / TOSP Full-Surface Conveyance Unlike with conventional top chains, where only carry-way conveyance is possible, the entire top plate surface can be used to convey objects for effective use of the whole conveyor. Safe Conveyance Crescent-shaped top plates keep the amount of space between links constant during conveyor cur ves, minimizing the chance of fingers or conveyed objects getting caught in the gaps. Output Scratch-Proof The top plates are plastic, so scratches a n d o t h e r s u c h d a m a g e to c o nveye d objects are kept to a minimum. Low Conveyor Height There is no return-way chain, thus avoiding chain slack and sliding against the rollers. The low height of the conveyor e n a b l e s i n s t a l l a ti o n i n p l a c e s w h e r e top-to-bottom space is limited. Note: Plastic Top Chain cannot be used in environments where it will be exposed to detergent and other such chemical liquids. Please contact a Tsubaki representative for chemical-resistant Plastic Top Chain.

Note: 1. Made-to-order product. 2. Shipped chain will consist of a number of standard chain lengths plus (if necessary) one fractional length having the number of links needed to make up the total chain length as ordered by the customer. Standard chain length is 40 links. 3. Values for maximum allowable load are at ambient temperature. 4. Bearing areas between the pins and bushings are pre-lubricated. 5. For TOSP chain, the sprockets should be installed in the curved sections. 6. Connecting pins not sold separately. 7. Do not use Plastic Top Chain in environments where it will be exposed to detergent...