* Some features can be different for certain types for design reasons. Trademarks are legally protected for the TSUBAKIKABELSCHLEPP GmbH as a national or international registration in the following countries:

1 Universal mounting bracket (UMB) with integratable strain relief comb 2 Designs with inside or outside opening stays 3 Extremely fast and easy to open due to ball joint mechanism 4 Top-mounted frame stay 5 Single-part links (type 020) 6 Favourable ratio of inner to outer width 7 Many separation options for the cables 8 Robust double-stroke system for long unsupported lengths 9 Easy divider fixing 10 Very quiet through integrated noise damping 11 Lateral wear surfaces 12 Single-part end connectors with integratable strain relief comb » Extensive unsupported lengths » High torsional rigidity...

UNIFLEX Advanced series I Overview g hj IlG Bj load “iiia*

Unsupported arrangement Gliding arrangement Inner Distribution vmax amax Vmax Omax

UNIFLEX Advanced QuickTrax® | EasyTrax® For an openable cable carrier with 16.5 -17.6 mm inner height we recommend the series QuickTrax® 0250 or EasyTrax® 0250 QT0250 from page 132 and ET0250 from page 246.

Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight qx=0.36 kg/m with Bj 50 mm. For other inner widths, the maximum additional load changes. Gliding arrangement dooann Subject to change without notice. | j The gliding cable carrier must be guided in a channel.

Stay arrangement on each Bj 30 - 50 mm chain link (VS: fully-stayed) UNIFLEX Advanced m The maximum cable diam-H eter strongly depends on the bending radius and the desired cable type. Cable carrier length Lk rounded to pitch t Stay variant Stay arrangement

Divider systems The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A). For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B). Divider system TSO without height separation Order example Please state the designation of the divider system (TSO), the version, and the number...

UA1250 I End connectorsSingle-part end connectors - plastic (with integrated strain relief) The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector. UNIFLEX Advanced ▲Assembly options :e-(e-(e-(e-(e-(e-(e-fe£ Driver Connection point Connection type F - fixed point A - threaded joint outside (standard) M - driver I - threaded joint inside H - threaded joint, rotated 90° to the outside K - threaded joint, rotated 90° to the inside Connection point Connection type

UNIFLEX Advanced QuickTrax® | EasyTrax® For an openable cable carrier with 18 - 20 mm inner height we recommend the series QuickTrax® 0320 or EasyTrax® 0320 QT0320 from page 138 and ET0320 from page 252.

Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight qx=0.40 kg/m with Bi 50 mm. For other inner widths, the maximum additional load changes. Gliding arrangement dooann Subject to change without notice. | j The gliding cable carrier must be guided in a channel.

Stay arrangement on each chain link (VS: fully-stayed) UNIFLEX Advanced m The maximum cable diam-H eter strongly depends on the bending radius and the desired cable type. Cable carrier length Lk rounded to pitch t Stay variant Stay arrangement

The divider system is mounted on every 2nd chain link as a Asa standard, dividers or the complete divider system standard. (dividers with height separations) are movable in the cross The dividers can be moved in the cross section. Divider system Please state the designation of the divider system (TSO), the version, and the number of dividers per cross section [nr]. You are welcome to add a sketch to your order. Subject to change without notice.

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector. ▲Assembly options The end connectors are also available as an option without integrated strain relief. Please state when ordering. Connection point Connection type F - fixed point A - threaded joint outside (standard) M - driver I - threaded joint inside H - threaded joint, rotated 90° to the outside K - threaded joint, rotated 90° to the inside Connection point Connection type

UNIFLEX Advanced » Weight-optimised plastic frame with particularly high torsional rigidity. » Outside: openable and detachable. » Weight-optimised plastic frame with particularly high torsional rigidity. » Inside: openable and detachable. For an openable cable carrier with 25 mm inner height we recommend the series EasyTrax® 1455

Unsupported • Gliding 163 Unsupported arrangement Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight qi,=0.75 kg/m with B, 38 mm. For other inner widths, the maximum additional load changes. Gliding arrangement I GO module with chain links optimized for gliding Subject to change without notice. UThe gliding cable carrier must be guided in a channel. See p. 866. The GO module mounted on the driver is a defined sequence of 5...

Dimensions • Technical dataStay variant 020-closed frame » Weight-optimised, closed plastic frame with particularly high torsional rigidity. Stay arrangement on each Bj 25 -130 mm chain link (VS: fully-stayed) The maximum cable diameter strongly depends on the bending radius and the desired cable type. Calculating the cable carrier lengthCable carrier length Lk Lk = y+ Lb Cable carrier length Lk rounded to pitch t Special version for support legs of commercial vehicles Special versions for the safe guiding and separating of rigid hydraulic hoses and electric cables in a limited space in extendable...