Catalogs >
TSUBAKI KABELSCHLEPP >
TKP35 series

TKP35 series
10Pages

Catalog excerpts

Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks Subject to change without notice. Robust all-rounder with variable inner distribution

Open the catalog to page 1

Cable carrier configuration Cable carrier 2 Designs with inward or outward opening crossbars 3 Easy and quick to open at any position 4 Integrated noise damping 5 Interior space is gentle on the cables without sharp edges 6 End connectors with optional strain relief » Easy-to-open versions, left or right (not Bi 16) » Quick and easy to open » Optional strain relief can be fully integrated into the end connector Reliable cable separation through fixable dividers Design 040 with inside opening and detachable crossbars on both sides TKK series Design 030 with outside opening and detachable...

Open the catalog to page 2

UNIFLEX Advanced series QuickTrax® series MONO series Materials information Configuration guidelines Cable carrier configuration Stay variant Opening variant Cable carrier Subject to change without notice. TKP35 series | Overview AddiCabletional dmax load [mm] ≤ [kg

Open the catalog to page 3

UNIFLEX Advanced series QuickTrax® series MONO series Materials information Configuration guidelines rotating arrangement Inner Distribution Cable carrier configuration 2.3 Gliding arrangement Travel amax vmax length ≤ [m/s] ≤ [m/s2] ≤ [m] vertical hanging or standing Unsupported arrangement Travel amax vmax length ≤ [m/s] ≤ [m/s2] ≤ [m] EasyTrax® series

Open the catalog to page 4

Subject to change without notice. EasyTrax® series UNIFLEX Advanced series QuickTrax® series MONO series Materials information Configuration guidelines Cable carrier configuration

Open the catalog to page 5

TKP35 | Installation dimensions | Unsupported Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight qk = 0.5 kg/m with Bi 16 mm. For other inner widths, the maximum additional load changes. Cable carrier configuration Configuration guidelines Materials information UNIFLEX Advanced series QuickTrax® series MONO series Cable carrier Unsupported arrangement Installation instructions, etc.: Additional info via your smartphone or...

Open the catalog to page 6

TKP35.030 | Dimensions · Technical data Stay variant 030 – with outside opening and detachable crossbars » Weight-optimised plastic frame with particularly high torsional rigidity. » Can be opened at any position on both sides. » Outside: opening and detachable crossbars. Stay arrangement on each chain link (VS: fully-stayed) Materials information The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. MONO series Configuration guidelines Cable carrier configuration Cable carrier Calculating the cable carrier length 40 Cable carrier...

Open the catalog to page 7

TKP35.040 | Dimensions · Technical data Cable carrier Stay variant 040 – with inside opening and detachable crossbars Cable carrier length Lk LS Lk ≈ ––– + LB 2 Cable carrier length Lk rounded to pitch t Bi UNIFLEX Advanced series 38 Order example TKP35 Type Stay variant Stay arrangement EasyTrax® series Subject to change without notice. MONO series QuickTrax® series Calculating the cable carrier length Materials information The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. KR Configuration guidelines Stay arrangement on each...

Open the catalog to page 8

Configuration guidelines Cable carrier configuration Cable carrier Divider systems The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A). For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B). Divider system TS0 without height separation Vers. aT min ax min ac min...

Open the catalog to page 9

TKP35 | End connectors Single-part end connectors – plastic (suitable for Bi 25 – 50) The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector. The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector. Assembly options Fixed point Connection type A – threaded joint outside (standard) I – threaded joint inside UNIFLEX Advanced series Connection point F – fixed point M – driver QuickTrax® series The end connectors are...

Open the catalog to page 10

TKP35 series 10Pages

Catalog excerpts

All TSUBAKI KABELSCHLEPP catalogs and technical brochures

TKP35 series
10Pages