Group: Tsubaki
Catalog excerpts
MONO series Trademarks are legally protected for the TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/Trademarks Cable carriers for standard applications
Open the catalog to page 1MONO series MONO series | Overview 4 Inner heights 10 – 15 Inner widths Plastic chain links Inside space is gentle on the cables – no interfering edges T ypes with single-part links T ypes with opening crossbars High torsional rigidity through large link surface E xtensive unsupported length and high additional loads through optimised stroke system E asy to shorten and extend L ong service life through large bolt hole connection E nd connectors with integrated strain relief tsubaki-kabelschlepp.com/ mono Features Cost-effective cable carrier Easy and fast installation ■■ Many types...
Open the catalog to page 2MONO series I Overview CO ’> 'T— I I 13 a & i M— CD Technical manual Do you need more information on the MONO series? Our technical manual with all information on configuring your cable carrier can be found at tsubaki-kabelschlepp.com/download.
Open the catalog to page 3Unsupported arrangement
Open the catalog to page 4MONO series Key for abbreviations on page 16 Design guidelines from page 62 Closed frame (design 020) ■■ Weight optimised, closed plastic frame with high torsional rigidity. ■■ Outside/inside: not openable. Technical support: technik@kabelschlepp.de Frame with outside opening crossbars (design 030) ■■ Weight optimised plastic frame with high torsional rigidity. ■■ Openable at any position. ■■ Outside: openable. Optimised cable carrier geometry: Long service life through large bolt hole connection H igh torsional rigidity through large link surface Extensive unsupported length and high...
Open the catalog to page 5Inner widths 6 40 Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight qk = 0.16 kg/m with Bi 15 mm. For other inner widths, the maximum additional load changes. UThe gliding cable carrier must be guided in a channel. See p. 732. Only designs 020 and 030 can be used for a gliding arrangement.
Open the catalog to page 60132 I Dimensions • Technical data CO c _o V-> Ctf CO ’> 'T— I I s a & i The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. Calculating the cable carrier length Cable carrier length Lk Lk - ^ + Lb Cable carrier length Lk rounded to pitch t
Open the catalog to page 7Type 0130 - with outside opening crossbars ■ Weight optimised plastic frame with high torsional rigidity. ■ Openable at any position. ■ Outside: openable. E o q | The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. i 03 _Q Calculating the cable “ carrier length Cable carrier length Lk Lk - -S- + Lb Cable carrier length Lk rounded to pitch t
Open the catalog to page 80134 I Dimensions • Technical data Type 0134 - with inside opening crossbars ■ Weight optimised plastic frame with high torsional rigidity. ■ Openable at any position. ■ Outside: openable. The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. Calculating the cable carrier length Cable carrier length Lk Lk - -S. + Lb Cable carrier length Lk rounded to pitch t Order example
Open the catalog to page 9Single-part end connectors - plastic (with integrated strain relief) The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector. Single-part end connectors - plastic The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector. Connection point F - fixed point M - driver Connection point F - fixed point M - driver Connection type A - threaded joint outside (standard) I - threaded joint inside Connection type A - threaded...
Open the catalog to page 10MONO series Key for abbreviations on page 16 Design guidelines from page 62 Closed frame (design 020) ■■ Weight optimised, closed plastic frame with high torsional rigidity. ■■ Outside/inside: not openable. Technical support: technik@kabelschlepp.de Frame with outside opening crossbars (design 030) ■■ Weight optimised plastic frame with high torsional rigidity. ■■ Openable at any position. ■■ Outside: openable. Optimised cable carrier geometry: Long service life through large bolt hole connection H igh torsional rigidity through large link surface Extensive unsupported length and high...
Open the catalog to page 11Inner heights ["] Inner widths Load diagram for unsupported length depending on the additional load. Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application. Intrinsic cable carrier weight qk = 0.25 kg/m with Bi 10 mm. For other inner widths, the maximum additional load changes. UThe gliding cable carrier must be guided in a channel. See p. 732. Only designs 020 and 030 can be used for a gliding arrangement.
Open the catalog to page 120182 I Dimensions • Technical data CO c _o V-> Ctf CO ’> 'T— I I s a & i The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. Calculating the cable carrier length Cable carrier length Lk Lk - ^ + Lb Cable carrier length Lk rounded to pitch t
Open the catalog to page 13Type 0180 - with outside opening crossbars ■ Weight optimised plastic frame with high torsional rigidity. ■ Openable at any position. ■ Outside: openable. E o q | The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. i 03 _Q Calculating the cable “ carrier length Cable carrier length Lk Lk - -S- + Lb Cable carrier length Lk rounded to pitch t
Open the catalog to page 14MONO series 0184 | Dimensions · Technical data Weight optimised plastic frame with high torsional rigidity. ■■ Openable at any position. ■■ Inside: openable. ■■ Design guidelines from page 62 Stay arrangement on each chain link (VS: fully-stayed) The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us. Type 0184 – with inside opening crossbars Calculating the cable carrier length Technical support: technik@kabelschlepp.de Cable carrier length Lk LS Lk ≈ ––– + LB 2 Cable carrier length Lk rounded to pitch t Order example Stay arrangement
Open the catalog to page 15All TSUBAKI KABELSCHLEPP catalogs and technical brochures
-
ROBOTRAX System
10 Pages
-
UAT series
10 Pages
-
XL Series
10 Pages
-
TKHD series
28 Pages
-
TKP35 series
10 Pages
-
TRAXLINE® DRAG CHAIN CABLES
204 Pages
-
KABELSCHLEPP TALKABOUTS
11 Pages
-
Product Portfolio
32 Pages
-
THE FLEXIBLE GUIDE SYSTEM
16 Pages
-
MASTER LE60/LE80
6 Pages
-
THE NEXT GENERATION
16 Pages
-
THE COMPLETE KABELSCHLEPP
780 Pages
-
Oil_Gas_Exploration
3 Pages
-
Systems for port crames
20 Pages
-
QuickTrax® series
23 Pages
-
PROTUM® series
35 Pages
-
EasyTrax® series
61 Pages
-
Applications at work
24 Pages
-
Cable Carrier Systems
16 Pages
-
GENERAL CATALOG
616 Pages
-
TRAXLINE_Cables_for_motion
88 Pages
-
The-next-Generation
16 Pages
-
TRAXLINE-Power-1000
24 Pages
-
Guideway protection systems
36 Pages
-
TKZP
11 Pages
-
TOTALTRAX turn-key systems
2 Pages
-
S/SX Series
20 Pages
-
Serie LS/LSX
10 Pages
-
MOBIFLEX
4 Pages
-
MONO
16 Pages
-
Product Showcase 2014
20 Pages
-
K Series
18 Pages
-
MASTER Series
10 Pages
-
M Series
22 Pages
-
QUANTUM
8 Pages
-
TKR
8 Pages
-
CoverTrax
48 Pages
-
UNIFLEX TUBES
10 Pages
-
CONDUFLEX
6 Pages
-
XLC 1650
6 Pages
-
PROTUM
6 Pages
-
EasyTrax
12 Pages
-
UNIFLEX
14 Pages
-
UNIFLEX Advanced
14 Pages
-
QuickTrax
8 Pages
-
MONO
16 Pages
-
TKP 0910
8 Pages
-
MASTER TUBES
6 Pages
-
MT Series (TUBES)
10 Pages
-
TKC Series (TUBES)
6 Pages
-
XLT Series (TUBES)
4 Pages
-
LS/LSX Series
10 Pages
-
S/SX Series
20 Pages