TLP300
5Pages

Catalog excerpts

TLP300 INCLINATION SENSOR Inclination Sensor in MEMS Technology CHARACTERISTICS ADVANTAGES MEMS technology High protection level IP67 and wide temperature range from -40°C ... +85°C Stable accuracy over whole temperature range Instantaneous Gyro-compensated measure Excellent accuracy Reliability and long service life for outdoor applications Very compact dimensions High shock/vibration resistance Optional redundant output CANopen output Wide range temperature MEMS sensors technology High High accuracy repeatability RoHS compliant v_I_) The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. - Via del Lavoro Artigiano 13/15, 25032 Chian (BS) - ITALY - P.IVA/C.F: IT03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 1

TLP300 INCLINATION SENSOR Inclination Sensor in MEMS Technology *tsm1Top Sensors Manufacture PRODUCT DESCRIPTION TLP300 is available with one or two measurement axes. The inclinometer working principle is based on a micro machined silicon capacitive transductor (developed with MEMS technology). Utilizing gyro-compensated MEMS technology, the sensor position signal is instantaneous with no delays and has a static excellent linearity. TLP300 is suited for applications (cranes, aerial platforms, drilling machines and excavators) in harsh environments which are exposed to motion, shock and...

Open the catalog to page 2

TLP300 INCLINATION SENSOR Inclination Sensor in MEMS Technology TECHNICAL SPECIFICATION OPERATING PRINCIPLE The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. - Via del Lavoro Artigiano 13/15, 25032 Chian (BS) - ITALY - P.IVA/C.F: IT03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 3

INCLINATION SENSOR Inclination Sensor in MEMS Technology DIRECTION AXES Dual axes The 2-dimensional inclination sensor must be mounted with the base plate in horizontal position, i.e. parallel to the horizontal line. The sensor can be inclined both towards the X and Y axis at the same time. For each axis a separate measured value is provided. Single axis TSM single axis TLP300 inclination sensor The 1-dimensional inclination sensor must be installed with its Z-axis in line with the force of gravity, as illustrated below. The 1-dimensional sensor defaul t position is 0° as shown in the...

Open the catalog to page 4

INCLINATION SENSOR Inclination Sensor in MEMS Technology The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. - Via del Lavoro Artigiano 13/15, 25032 Chiari (BS) - ITALY - P.IVA/C.F: IT03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 5