Catalogs >
TSM SENSORS SRL >
TLP300 CANopen

TLP300 CANopen
7Pages

Catalog excerpts

TLP300 CANopen INCLINOMETER MEMS technology tilt sensor CHARACTERISTICS ADVANTAGES MEMS technology High protection level and wide temperature range High temperature stability Resolution up to 0.01° Single axis range ±180° or 0 ... 360° Dual axis range up to ± 85° Gyro-compensated Excellent accuracy Reliability and long service life for outdoor applications Compact dimensions Designed for harsh enviromental conditions Redundancy output Reverse polarity protection *fj Wide temp. range CANopen Safety MEMS sensors technology High accuracy High repeatability The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 1

MEMS technology tilt sensor PRODUCT DESCRIPTION An inclinometer measures the angle to the direction of the gravity in one or more axes. TLP300 is the new family of inclination sensors, based on the MEMS technology, capable of working in extreme conditions and hard environments, subjected to sharp movements, shocks and high vibrations. The integration of accelerometers and gyroscopes with sensor fusion proprietary algorithms, ensure high performances over all the operating range. The company reserves the right to make any kind of design or functional modification at any moment without prior...

Open the catalog to page 2

TLP300 CANopen INCLINOMETER MEMS technology tilt sensor [1 Di ■ pr. a Power supply range O < = Dual axis (floor mounting) V 4 = Single axis (wall mounting) [c Measurement range Output type 28 4 = CANopen with diagnostics 1 4 = Male connector M12, 5-pin PUR cable 30cm 2 4 = Male flange connector M12, 5-pin 20 4 = Overmolded Deutsch DT04-4P, PUR cable 30cm 20A 4 = Overmolded Deutsch DT04-4P, PUR cable 30cm pinout type A [f Architecture® S •< = Single tilt sensor R 4 = Redundant tilt sensors [g Options 0 4 = Static (without gyro-compensation function) 1 * = Dynamic (with gyro-compensation...

Open the catalog to page 3

TLP300 CANopen INCLINOMETER MEMS technology tilt sensor TECHNICAL SPECIFICATION OPERATING PRINCIPLE Measuring range ELECTRICAL CHARACTERISTICS MEMS, or Micro Electro-Mechanical System, is a chip-based technology where sensors are composed of proof masses sprung between capacitive plates. Each mass act like a moving plate of a variable capacitor formed by an array of interlaced 'fingers'. When the sensor is tilted, the mass moves changing the distance between the plates and therefore the capacitance. By measuring the capacitance variation the angle value can be detected. Power supply range...

Open the catalog to page 4

TLP300 CANopen INCLINOMETER MEMS technology tilt sensor 1 & 2] ELECTRICAL CONNECTION M12 X 5 PINS 20] ELECTRICAL CONNECTION DEUTSCH DT04-4P 20A] ELECTRICAL CONNECTION DEUTSCH DT04-4P pinout type A Pinout CAN-L CAN-H +Vin GND * GND and CAN_GND terminals are internally connected to each other and identical in their function The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco...

Open the catalog to page 5

MEMS technology tilt sensor COUNTING DIRECTION Dual axis The 2-dimensional tilt sensor must be mounted with the base plate in horizontal position, i.e. parallel to the horizontal line. The sensor can be tilted to both the X and Y axes at the same time. A separate measure is provided for each axis. Single axis TLP300 single axis inclinometer The 1-dimensional tilt sensor must be installed with the base plate in vertical position, i.e. Z-axis perpendicular to the force of gravity. The default “zero point” position is the one shown in the following images. The company reserves the right to...

Open the catalog to page 6

MEMS technology tilt sensor The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 7