Catalogs >
TSM SENSORS SRL >
TLP300 Analog 2023

TLP300 Analog 2023
1 / 7Pages

Catalog excerpts

MEMS technology tilt sensor CHARACTERISTICS ADVANTAGES MEMS technology High protection level and wide temperature range High temperature stability Resolution up to 0.01° Single axis range ±180° or 0 ... 360° Dual axis range up to ± 60° Excellent accuracy Reliability and long service life for outdoor applications Compact dimensions Designed for harsh enviromental conditions Wide temp. range MEMS sensors technology Reverse polarity protection HrRoHS compliant The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 1

MEMS technology tilt sensor PRODUCT DESCRIPTION An inclinometer measures the angle to the direction of the gravity in one or more axes. The perfect synthesis of precision, stability, robustness and cost, which make it suitable for use on mobile devices and applications such as: cranes, aerial platforms, operating and earth moving machines. The integration of accelerometers and gyroscopes with sensor fusion proprietary algorithms, ensure high performances over all the operating range. The company reserves the right to make any kind of design or functional modification at any moment without...

Open the catalog to page 2

MEMS technology tilt sensor PRODUCT CODE TLP300 r? -Cf Power supply range O ■* = Dual axis (floor mounting) V < = Single axis - unipolar (wall mounting) VI ■* = Single axis - bipolar (wall mounting) Output type 1 ■* = Male connector M12, 5-pin PUR cable 30cm 2 <= Male flange connector M12, 5-pin S « = Single tilt sensor R < = Redundant tilt sensors Static (without gyro-compensation function) (1) Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. (2) Redundant architecture is available only for V e V1 axis type. The company reserves the right to...

Open the catalog to page 3

MEMS technology tilt sensor TECHNICAL SPECIFICATION - OPERATING PRINCIPLE Measuring range ELECTRICAL CHARACTERISTICS Power supply range MEMS, or Micro Electro-Mechanical System, is a chip-based technology where sensors are composed of proof masses sprung between capacitive plates. Each mass act like a moving plate of a variable capacitor formed by an array of interlaced 'fingers'. When the sensor is tilted, the mass moves changing the distance between the plates and therefore the capacitance. By measuring the capacitance variation the angle value can be detected. ELECTRICAL CONNECTION M12 X...

Open the catalog to page 4

MEMS technology tilt sensor ANALOG OUTPUTS Single axis Dual axis Inclination Inclination OUT OF RANGE Inclination Inclination OUT OF90° RANGE Inclination Inclination OUT OF90° RANGE Inclination Inclination The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IV

Open the catalog to page 5

MEMS technology tilt sensor COUNTING DIRECTION Dual axis The 2-dimensional tilt sensor must be mounted with the base plate in horizontal position, i.e. parallel to the horizontal line. The sensor can be tilted to both the X and Y axes at the same time. A separate measure is provided for each axis. Single axis TLP300 single axis inclinometer The 1-dimensional tilt sensor must be installed with the base plate in vertical position, i.e. Z-axis perpendicular to the force of gravity. The default “zero point” position is the one shown in the following images. The company reserves the right to...

Open the catalog to page 6

MEMS technology tilt sensor The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 7