*mydirectindustry

TLP200 Analog

Product catalog summary

Product Overview
The TLP200 Analog Inclinometer is a MEMS technology-based tilt sensor designed for measuring angles relative to gravity across one or more axes. It is suitable for extreme conditions and harsh environments, making it ideal for mobile applications such as cranes and earth-moving machines. The sensor integrates accelerometers and gyroscopes with proprietary algorithms to ensure high performance.

Key Characteristics

MEMS technology with high protection level and temperature stability.
Resolution up to 0.01° with a single-axis range of 0 to 360°.
Excellent accuracy, reliability, and long service life for outdoor applications.
Compact design suitable for harsh environmental conditions.

Technical Specifications

Measuring range: 0 to 360°.
Linearity at 25°C: ±0.5°.
Temperature range: -40°C to +85°C.
Protection class: IP67.
Shock resistance: 50 G, 11 ms, 100 shocks per axis.
Vibration resistance: 10 to 500 Hz, 10g, 2h per axis.

Electrical Characteristics

Power supply range: 12 to 30 V DC.
Typical consumption: 35 mA at 12 VDC, 20 mA at 24 VDC.
Startup time: less than 300ms.
Electromagnetic compatibility: compliant with EN 61000-6-2, EN 61000-6-4.
EU Conformity: EMC directive 2014/30/EU, RoHS directive 2011/65/EU + 2015/863/EU.

Ordering Information
The product code is structured to specify power supply range, axis type, measurement range, output type, connections, architecture, and options. Not all combinations are available, and confirmation from TSM is required before ordering.

Installation and Usage
The inclinometer should be installed with the base plate in a vertical position, with the Z-axis perpendicular to gravity. The default zero point is predefined, but custom zero points and counting directions are available upon request.

Dimensions
The device dimensions are provided in millimeters, with a maximum tightening torque of 2Nm for the screws.

Catalog excerpts

MEMS technology tilt sensor CHARACTERISTICS ADVANTAGES MEMS technology High protection level and wide temperature range High temperature stability Resolution up to 0.01° Single axis range 0 ... 360° Excellent accuracy Reliability and long service life for outdoor applications Compact dimensions Designed for harsh enviromental conditions Reverse polarity protection Wide temp, range MEMS sensors technology RoHS compliant The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

Open the catalog to page 1

MEMS technology tilt sensor PRODUCT DESCRIPTION An inclinometer measures the angle to the direction of the gravity in one or more axes. The perfect synthesis of precision, stability, robustness and cost, which make it suitable for use on mobile devices and applications such as: cranes, aerial platforms, operating and earth moving machines. The integration of accelerometers and gyroscopes with sensor fusion proprietary algorithms, ensure high performances over all the operating range. The company reserves the right to make any kind of design or functional modification at any moment without prior...

Open the catalog to page 2

MEMS technology tilt sensor PRODUCT CODE [A Power supply range V < = Single axis - unipolar (wall mounting) [A Measurement range 1 < = Male connector M12, 5-pin PUR cable 30cm 14 < = AMP Superseal 4P 282106-1 with Schlemmer case (7807771 and scabbard 19260691), 10cm included connector S < = Single tilt sensor (1) Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG)...

Open the catalog to page 3

INCLINOMETER MEMS technology tilt sensor 'TSM,Top Sensors Manufacture TECHNICAL SPECIFICATION - OPERATING PRINCIPLE Measuring range ELECTRICAL CHARACTERISTICS MEMS, or Micro Electro-Mechanical System, is a chip-based technology where sensors are composed of proof masses sprung between capacitive plates. Each mass act like a moving plate of a variable capacitor formed by an array of interlaced 'fingers'. When the sensor is tilted, the mass moves changing the distance between the plates and therefore the capacitance. By measuring the capacitance variation the angle value can be detected. Power...

Open the catalog to page 4

TLP200 AnalogINCLINOMETERMEMS technology tilt sensor ANALOG OUTPUTS Single axis COUNTING DIRECTION TLP200 single axis inclinometer The 1-dimensional tilt sensor must be installed with the base plate in vertical position, i.e. Z-axis perpendicular to the force of gravity. The default "zero point" position is the one shown in the following images. Z = 0° (4 ... 20 mA)Z = 180° (12 mA)Z = 270° (16 mA) The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY...

Open the catalog to page 5

MEMS technology tilt sensor The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

Open the catalog to page 6

TLP200 Analog

TLP200 Analog

Catalog excerpts

All TSM SENSORS SRL catalogs and technical brochures

Archived catalogs