ROTARY ENCODER Absolute single turn magnetic encoder without shaft CHARACTERISTICS ADVANTAGES Measuring range 0° to 360° Redundant sensors Compact size Linearity up to ±0.5° High protection level and wide temperature range Anodized aluminum housing Hall effect technology Reliability and long service life Excellent accuracy Several connections type available Highly configurable via CANopen Firmware upgradable via proprietary bootloader High protection level Reverse polarity protection Wide temp. range RoHS compliant The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

RTE200 CANopen ROTARY ENCODER Absolute single turn magnetic encoder without shaft PRODUCT DESCRIPTION The contactless technology together with the anodized aluminum housing make this sensor a very robust device with expected life practically infinite thanks to the absence of wear on the sensing element. Excellent accuracy, high IP rating, shock and vibration resistance and electromagnetic immunity makes this transducer suitable for mobile hydraulic applications such as: agricultural vehicles, earth moving machines, construction equipment, articulated arm cranes and aerial work platforms. The...

RTE200 CANopenROTARY ENCODER Absolute single turn magnetic encoder without shaft PRODUCT CODE Counting direction © Power supply range 28 < = CANopen with diagnostics 1 * = Male connector M12x5, PUR cable 30cm 4 4 = Wire connector 5x0.25mm2 PUR cable 30cm 13 ■* = Overmolded Deutsch DT04-6P, PUR cable 30cm 20 * = Overmolded Deutsch DT04-4P, PUR cable 30cm 30 < = Molex Micro-Fit 6 poles (cod. 43025-0600) with PUR cable 30cm 31 < = Male connector M8x5 molded 90°, PUR cable 15cm code B 39 ■* = PUR cable 60cm with DT04-6P connector to be assembly® (1) Not all combinations can be ordered. Please contact...

RTE200 CANopen tROTARY ENCODER ^ Absolute single turn magnetic encoder without shaft Top sensois Manufacture TECHNICAL SPECIFICATION Measuring range - OPERATING PRINCIPLE Hall effect Bases its operation principle on the generation of a voltage across an electrical conductor when a magnetic field is applied in a direction perpendicular to the current flow. An hall-effect rotary sensor gives the absolute angular position of a small rotating dipole magnet above the device surface (end of shaft magnet). Power supply range The company reserves the right to make any kind of design or functional modification...

RTE200 CANopenROTARY ENCODERAbsolute single turn magnetic encoder without shaft 1] ELECTRICAL CONNECTION M12 X 5 PINS 4] ELECTRICAL CONNECTION WIRE CONECTOR 13 & 39] ELECTRICAL CONNECTION DEUTSCH DT04-6P * GND and CAN_GND terminals are internally connected to each other and identical in their function * GND and CAN_GND terminals are internally connected to each other and identical in their function 20] ELECTRICAL CONNECTION DEUTSCH DT04-4P 31] ELECTRICAL CONNECTION M8 X 5 PINS 30] ELECTRICAL CONNECTION MICROFIT 6 PINS The company reserves the right to make any kind of design or functional modification...

RTE200 CANopen ROTARY ENCODER Absolute single turn magnetic encoder without shaft COUNTING DIRECTION (BOTTOM VIEW) 2] “Zero point is not marked and differs for each unit. It is recommended to set the zero point by sending the related command once the sensor has been installed on the final application” MAGNET POSITIONING TOLERANCES Max radial X - Y misalignment: 1 mm NOTE: a) Any extra offset or misalignment increases the non-linearity. b) Each sensor MUST be mounted with its own rotor / screw / magnet included in the package. c) Magnet should NOT be incorporated in a ferromagnetic housing (holder)...

Absolute single turn magnetic encoder without shaft Top Sensors Manufacture MAGNETS DIMENSIONS [mm] 1] Rotor STD 13 Anodized aluminum Recommended shaft 0 12 fix threaded x2 pin M4 (included in delivery) The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

RTE200 CANopen tROTARY ENCODER ^ Absolute single turn magnetic encoder without shaft Top sensois Manufacture * MAX tightening torque 2.5Nm The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com